Files
crosspoint-reader-mod/lib/EpdFont/FontDecompressor.h

80 lines
3.0 KiB
C
Raw Normal View History

perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
#pragma once
#include <InflateReader.h>
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
#include <vector>
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
#include "EpdFontData.h"
class FontDecompressor {
public:
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
static constexpr uint16_t MAX_PAGE_GLYPHS = 512;
FontDecompressor() = default;
~FontDecompressor();
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
bool init();
void deinit();
// Returns pointer to decompressed bitmap data for the given glyph.
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
// Checks the page buffer (from prewarm) first, then falls back to the hot group slot.
const uint8_t* getBitmap(const EpdFontData* fontData, const EpdGlyph* glyph, uint32_t glyphIndex);
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
// Free all cached data (page buffer + hot group).
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
void clearCache();
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
// Pre-scan UTF-8 text and extract needed glyph bitmaps into a flat page buffer.
// Each group is decompressed once into a temp buffer; only needed glyphs are kept.
// Returns the number of glyphs that couldn't be loaded (0 on full success).
int prewarmCache(const EpdFontData* fontData, const char* utf8Text);
struct Stats {
uint32_t cacheHits = 0;
uint32_t cacheMisses = 0;
uint32_t decompressTimeMs = 0;
uint16_t uniqueGroupsAccessed = 0;
uint32_t pageBufferBytes = 0; // pageBuffer allocation
uint32_t pageGlyphsBytes = 0; // pageGlyphs lookup table allocation
uint32_t hotGroupBytes = 0; // current hot group allocation
uint32_t peakTempBytes = 0; // largest temp buffer in prewarm
uint32_t getBitmapTimeUs = 0; // cumulative getBitmap time (micros)
uint32_t getBitmapCalls = 0; // number of getBitmap calls
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
};
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
void logStats(const char* label = "FDC");
void resetStats();
const Stats& getStats() const { return stats; }
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
private:
Stats stats;
InflateReader inflateReader;
perf: font-compression improvements (#1056) ## Purpose This PR includes some preparatory changes that are needed for an upcoming performant CJK font feature. The changes have no impact on render time and heap allocation for latin text. **Despite this, I think these changes stand on their own as a better font compression/decompression implementation.** ## Summary - Font decompressor rewrite: Replaced the 4-slot LRU group cache with a two-tier system — a page buffer (glyphs prewarmed before rendering begins) and a hot-group fallback (last decompressed group retained for non-prewarmed glyphs). - Byte-aligned compressed bitmap format: Glyph bitmaps within compressed groups are now stored row-padded rather than tightly packed before DEFLATE compression, improving compression ratios by making identical pixel rows produce identical byte patterns. Glyphs are compacted back to packed format on demand at render time. Reduces flash size by 155 KB. - Page prewarm system: Added `Page::collectText` and `Page::getDominantStyle` to extract per-style glyph requirements before rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only the groups needed for the dominant style — eliminating mid-render decompression for the common case. - UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation bytes and returns a replacement glyph on malformed input; `ChapterHtmlSlimParser` correctly preserves incomplete multi-byte sequences across word-buffer flush boundaries rather than splitting them. --- ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Architecture and design was done by me, refined a bit by Claude. Code mostly by Claude, but not entirely.
2026-03-12 07:05:46 +11:00
// Page buffer: flat array of prewarmed glyph bitmaps with sorted lookup
struct PageGlyphEntry {
uint32_t glyphIndex;
uint32_t bufferOffset;
uint32_t alignedOffset; // byte-aligned offset within its decompressed group (set during prewarm pre-scan)
};
uint8_t* pageBuffer = nullptr;
const EpdFontData* pageFont = nullptr;
PageGlyphEntry* pageGlyphs = nullptr;
uint16_t pageGlyphCount = 0;
// Hot group: last decompressed group (byte-aligned) for non-prewarmed fallback path.
// Kept in byte-aligned format; individual glyphs are compacted on demand into hotGlyphBuf.
const EpdFontData* hotGroupFont = nullptr;
uint16_t hotGroupIndex = UINT16_MAX;
std::vector<uint8_t> hotGroup;
// Scratch buffer for compacting a single glyph from the hot group.
// Valid until the next getBitmap() call.
std::vector<uint8_t> hotGlyphBuf;
void freePageBuffer();
void freeHotGroup();
uint16_t getGroupIndex(const EpdFontData* fontData, uint32_t glyphIndex);
uint32_t getAlignedOffset(const EpdFontData* fontData, uint16_t groupIndex, uint32_t glyphIndex);
bool decompressGroup(const EpdFontData* fontData, uint16_t groupIndex, uint8_t* outBuf, uint32_t outSize);
static void compactSingleGlyph(const uint8_t* alignedSrc, uint8_t* packedDst, uint8_t width, uint8_t height);
static int32_t findGlyphIndex(const EpdFontData* fontData, uint32_t codepoint);
perf: Reduce overall flash usage by 30.7% by compressing built-in fonts (#831) ## Summary **What is the goal of this PR?** Compress reader font bitmaps to reduce flash usage by 30.7%. **What changes are included?** - New `EpdFontGroup` struct and extended `EpdFontData` with `groups`/`groupCount` fields - `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group + groups of 8) and compresses each with raw DEFLATE - `FontDecompressor` class with 4-slot LRU cache for on-demand decompression during rendering - `GfxRenderer` transparently routes bitmap access through `getGlyphBitmap()` (compressed or direct flash) - Uses `uzlib` for decompression with minimal heap overhead. - 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated with compression; 5 UI fonts unchanged - Round-trip verification script (`verify_compression.py`) runs as part of font generation ## Additional Context ## Flash & RAM | | baseline | font-compression | Difference | |--|--------|-----------------|------------| | Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B (-30.7%) | | firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) | | RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) | ## Script-Based Grouping (Cold Cache) Comparison of uncompressed baseline vs script-based group compression (4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic, General Punctuation, etc.) instead of sequential groups of 8. ### Render Time | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) | | **Pages** | 37 | 37 | | ### Memory Usage | | Baseline | Compressed (cold cache) | Difference | |---|---|---|---| | **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB | | **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB | | **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB | | **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB | ### Cache Effectiveness | | Misses/page | Hit rate | |---|---|---| | **Compressed (cold cache)** | 2.1 | 99.85% | ------ ### AI Usage While CrossPoint doesn't have restrictions on AI tools in contributing, please be transparent about their usage as it helps set the right context for reviewers. Did you use AI tools to help write this code? _**YES**_ Implementation was done by Claude Code (Opus 4.6) based on a plan developed collaboratively. All generated font headers were verified with an automated round-trip decompression test. The firmware was compiled successfully but has not yet been tested on-device. --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-19 20:30:15 +11:00
};