feat: Initial support for the x3 (#875)

## Summary

Adds Xteink X3 hardware support to CrossPoint Reader. The X3 uses the
same SSD1677 e-ink controller as the X4 but with a different panel
(792x528 vs 800x480), different button layout, and an I2C fuel gauge
(BQ27220) instead of ADC-based battery reading.

All X3-specific behavior is gated by runtime device detection — X4
behavior is unchanged.

Depends on community-sdk X3 support: open-x4-epaper/community-sdk#19
(merged).

## Changes

### HAL Layer

**HalGPIO** (`lib/hal/HalGPIO.cpp/.h`)
- I2C-based device fingerprinting at boot: probes for BQ27220 fuel
gauge, DS3231 RTC, and QMI8658 IMU to distinguish X3 from X4
- Detection result cached in NVS for fast subsequent boots
- Exposes `deviceIsX3()` / `deviceIsX4()` helpers used throughout the
codebase
- X3 button mapping (7 GPIOs vs X4's layout)
- USB connection detection and wake classification for X3

**HalDisplay** (`lib/hal/HalDisplay.cpp/.h`)
- Calls `einkDisplay.setDisplayX3()` before init when X3 is detected
- Requests display resync after power button / flash wake events
- Runtime display dimension accessors (`getDisplayWidth()`,
`getDisplayHeight()`, `getBufferSize()`)
- Exposed as global `display` instance for use by image converters

**HalPowerManager** (`lib/hal/HalPowerManager.cpp/.h`)
- X3 battery reading via I2C fuel gauge (BQ27220 at 0x55, SOC register)
- X3 power button uses GPIO hold for deep sleep

### Display & Rendering

**GfxRenderer** (`lib/GfxRenderer/GfxRenderer.cpp/.h`)
- Buffer size and display dimensions are now runtime values (not
compile-time constants) to support both panel sizes
- X3 anti-aliasing tuning: only the darker grayscale level is applied to
avoid washed-out text on the X3 panel. X4 retains both levels via
`deviceIsX4()` gate

**Image Converters** (`lib/JpegToBmpConverter`, `lib/PngToBmpConverter`)
- Cover image prescale target uses runtime display dimensions from HAL
instead of hardcoded 800x480

### UI Themes

**BaseTheme / LyraTheme** (`src/components/themes/`)
- X3 button position mapping for the different physical layout
- Adjusted UI element positioning for 792x528 viewport

### Boot & Init

**main.cpp**
- X3 hardware detection logging
- Adjusted init sequence for X3 (no `HalSystem::begin()` dependency on
X3 path)

**HomeActivity**
- Uses runtime `renderer.getBufferSize()` instead of static
`GfxRenderer::getBufferSize()`

FYI I did not add support for the gyro page turner. That can be it's own
PR.

lib/hal/HalPowerManager.h

@@ -1,8 +1,10 @@
 #pragma once
 
 #include <Arduino.h>
+#include <BatteryMonitor.h>
 #include <InputManager.h>
 #include <Logging.h>
+#include <Wire.h>
 #include <freertos/semphr.h>
 
 #include <cassert>
@@ -16,6 +18,11 @@ class HalPowerManager {
   int normalFreq = 0;  // MHz
   bool isLowPower = false;
 
+  // I2C fuel gauge configuration for X3 battery monitoring
+  bool _batteryUseI2C = false;                   // True if using I2C fuel gauge (X3), false for ADC (X4)
+  mutable int _batteryCachedPercent = 0;         // Last read battery percentage (0-100)
+  mutable unsigned long _batteryLastPollMs = 0;  // Timestamp of last battery read in milliseconds
+
   enum LockMode { None, NormalSpeed };
   LockMode currentLockMode = None;
   SemaphoreHandle_t modeMutex = nullptr;  // Protect access to currentLockMode
@@ -23,6 +30,7 @@ class HalPowerManager {
  public:
   static constexpr int LOW_POWER_FREQ = 10;                    // MHz
   static constexpr unsigned long IDLE_POWER_SAVING_MS = 3000;  // ms
+  static constexpr unsigned long BATTERY_POLL_MS = 1500;       // ms
 
   void begin();