## Summary
Continue my experiment from
https://github.com/crosspoint-reader/crosspoint-reader/pull/801
This PR add the ability to lower the CPU frequency on extended idle
period (currently set to 3 seconds). By default, the esp32c3 CPU is set
to 160MHz, and now on idle, we can reduce it to just 10MHz.
Note that while this functionality is already provided by [esp power
management](https://docs.espressif.com/projects/esp-idf/en/v4.3/esp32c3/api-reference/system/power_management.html),
the current Arduino build lacks of this, and enabling it is just too
complicated (not worth the effort compared to this PR)
Update: more info in
https://github.com/crosspoint-reader/crosspoint-reader/pull/852#issuecomment-3904562827
## Testing
Pre-condition for each test case: the battery is charged to 100%, and is
left plugged in after fully charged for an extra 1 hour.
The table below shows how much battery is **used** for a given duration:
| case / duration | 6 hrs | 12 hrs |
| --- | --- | --- |
| `delay(10)` | 26% | 48% |
| `delay(50)`, PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/801 | 20% |
Not tested |
| `delay(50)` + low CPU freq (This PR) | Not tested | 25% |
| `delay(10)` + low CPU freq (1) | Not tested | Not tested |
(1) I decided not to test this case because it may not make sense. The
problem is that CPU frequency vs power consumption do not follow a
linear relationship, see
[this](https://www.arrow.com/en/research-and-events/articles/esp32-power-consumption-can-be-reduced-with-sleep-modes)
as an example. So, tight loop (10ms) + lower CPU freq significantly
impact battery life, because the active CPU time is now much higher
compared to the wall time.
**So in conclusion, this PR improves ~150% to ~200% battery use time per
charge.**
The projected battery life is now: ~36-48 hrs of reading time (normal
reading, no wifi)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier
This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.
SD card HAL will be added via another PR, because it's a bit more
tricky.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
