## Summary
- Upgrade platform from espressif32 6.12.0 (Arduino Core 2.0.17) to
pioarduino 55.03.37 (Arduino Core 3.3.7, ESP-IDF 5.5.2)
- Add WebDAV Class 1 server (RFC 4918) - SD card can be mounted as a
network drive
- I also slightly fixed the SDK and also made a [pull request
](https://github.com/open-x4-epaper/community-sdk/pull/21)
First PR #1030 (was closed because the implementation was based on an
old version of the libraries)
Issue #439
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Definition and use of a central LOG function, that can later be
extended or completely be removed (for public use where debugging
information may not be required) to save flash by suppressing the
-DENABLE_SERIAL_LOG like in the slim branch
* **What changes are included?**
## Additional Context
* By using the central logger the usual:
```
#include <HardwareSerial.h>
...
Serial.printf("[%lu] [WCS] Obfuscating/deobfuscating %zu bytes\n", millis(), data.size());
```
would then become
```
#include <Logging.h>
...
LOG_DBG("WCS", "Obfuscating/deobfuscating %zu bytes", data.size());
```
You do have ``LOG_DBG`` for debug messages, ``LOG_ERR`` for error
messages and ``LOG_INF`` for informational messages. Depending on the
verbosity level defined (see below) soe of these message types will be
suppressed/not-compiled.
* The normal compilation (default) will create a firmware.elf file of
42.194.356 bytes, the same code via slim will create 42.024.048 bytes -
170.308 bytes less
* Firmware.bin : 6.469.984 bytes for default, 6.418.672 bytes for slim -
51.312 bytes less
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _NO_
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
## Summary
Continue my changes to introduce the HAL infrastructure from
https://github.com/crosspoint-reader/crosspoint-reader/pull/522
This PR touches quite a lot of files, but most of them are just name
changing. It should not have any impacts to the end behavior.
## Additional Context
My plan is to firstly add this small shim layer, which sounds useless at
first, but then I'll implement an emulated driver which can be helpful
for testing and for development.
Currently, on my fork, I'm using a FS driver that allow "mounting" a
local directory from my computer to the device, much like the `-v` mount
option on docker. This allows me to quickly reset `.crosspoint`
directory if anything goes wrong. I plan to upstream this feature when
this PR get merged.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
Our esp32 consistently dropped the last few packets of the TCP transfer
in the old implementation. Only about 1/5 transfers would complete. I've
refactored that entire system into an actual Calibre Device Plugin that
basically uses the exact same system as the web server's file transfer
protocol. I kept them separate so that we don't muddy up the existing
file transfer stuff even if it's basically the same at the end of the
day I didn't want to limit our ability to change it later.
I've also added basic auth to OPDS and renamed that feature to OPDS
Browser to just disassociate it from Calibre.
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
- Rewrite OpdsParser to stream parsing instead of full content
- Fix OOM due to big http xml response
Closes#385
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Adds support for browsing and downloading books from a Calibre-web
server via OPDS.
How it works
1. Configure server URL in Settings → Calibre Web URL (e.g.,
https://myserver.com:port I use Cloudflare tunnel to make my server
accessible anywhere fwiw)
2. "Calibre Library" will now show on the the home screen
3. Browse the catalog - navigate through categories like "By Newest",
"By Author", "By Series", etc.
4. Download books - select a book and press Confirm to download the EPUB
to your device
Navigation
- Up/Down - Move through entries
- Confirm - Open folder or download book
- Back - Go to parent catalog, or exit to home if at root
- Navigation entries show with > prefix, books show title and author
- Button hints update dynamically ("Open" for folders, "Download" for
books)
Technical details
- Fetches OPDS catalog from {server_url}/opds
- Parses both navigation feeds (catalog links) and acquisition feeds
(downloadable books)
- Maintains navigation history stack for back navigation
- Handles absolute paths in OPDS links correctly (e.g.,
/books/opds/navcatalog/...)
- Downloads EPUBs directly to the SD card root
Note
The server URL should be typed to include https:// if the server
requires it - HTTP→HTTPS redirects may cause SSL errors on ESP32.
## Additional Context
* I also changed the home titles to use uppercase for each word and
added a setting to change the size of the side margins
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
