Currently, each activity has to manage their own `displayTaskLoop` which
adds redundant boilerplate code. The loop is a wait loop which is also
not the best practice, as the `updateRequested` boolean is not protected
by a mutex.
In this PR:
- Move `displayTaskLoop` to the super `Activity` class
- Replace `updateRequested` with freeRTOS's [direct to task
notification](https://www.freertos.org/Documentation/02-Kernel/02-Kernel-features/03-Direct-to-task-notifications/01-Task-notifications)
- For `ActivityWithSubactivity`, whenever a sub-activity is present, the
parent's `render()` automatically goes inactive
With this change, activities now only need to expose `render()`
function, and anywhere in the code base can call `requestUpdate()` to
request a new rendering pass.
In theory, this change may also make the battery life a bit better,
since one wait loop is removed. Although the equipment in my home lab
wasn't been able to verify it (the electric current is too noisy and
small). Would appreciate if anyone has any insights on this subject.
Update: I managed to hack [a small piece of
code](https://github.com/ngxson/crosspoint-reader/tree/xsn/measure_cpu_usage)
that allow tracking CPU idle time.
The CPU load does decrease a bit (1.47% down to 1.39%), which make
sense, because the display task is now sleeping most of the time unless
notified. This should translate to a slightly increase in battery life
in the long run.
```
PR:
[40012] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[40012] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[50017] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[50017] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[60022] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[60022] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
master:
[20012] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[20012] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[30017] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[30017] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[40022] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[40022] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
```
---
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
* **Refactor**
* Streamlined rendering architecture by consolidating update mechanisms
across all activities, improving efficiency and consistency.
* Modernized synchronization patterns for display updates to ensure
reliable, conflict-free rendering.
* **Bug Fixes**
* Enhanced rendering stability through improved locking mechanisms and
explicit update requests.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Co-authored-by: znelson <znelson@users.noreply.github.com>
Our esp32 consistently dropped the last few packets of the TCP transfer
in the old implementation. Only about 1/5 transfers would complete. I've
refactored that entire system into an actual Calibre Device Plugin that
basically uses the exact same system as the web server's file transfer
protocol. I kept them separate so that we don't muddy up the existing
file transfer stuff even if it's basically the same at the end of the
day I didn't want to limit our ability to change it later.
I've also added basic auth to OPDS and renamed that feature to OPDS
Browser to just disassociate it from Calibre.
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** Fixes#199 - Device falls asleep
during WiFi file transfer after 10 minutes of inactivity, disconnecting
the web server.
* **What changes are included?**
- Add `preventAutoSleep()` virtual method to `Activity` base class
- Modify main loop to reset inactivity timer when `preventAutoSleep()`
returns true
- Override `preventAutoSleep()` in `CrossPointWebServerActivity`
(returns true when web server running)
- Override `preventAutoSleep()` in `OtaUpdateActivity` (returns true
during update check/download)
## Additional Context
* The existing `skipLoopDelay()` method controls loop timing (yield vs
delay) for HTTP responsiveness. The new `preventAutoSleep()` method is
semantically separate - it explicitly signals that an activity should
keep the device awake.
* `CrossPointWebServerActivity` uses both methods: `skipLoopDelay()` for
responsive HTTP handling, `preventAutoSleep()` for staying awake.
* `OtaUpdateActivity` only needs `preventAutoSleep()` since the OTA
library handles HTTP internally.
## Summary
**What is the goal of this PR?**
Adds a setting to swap the front buttons. The default functionality are:
Back/Confirm/Left/Right. When this setting is enabled they become:
Left/Right/Back/Confirm. This makes it more comfortable to use when
holding in your right hand since your thumb can more easily rest on the
next button. The original firmware has a similar setting.
**What changes are included?**
- Add the new setting.
- Create a mapper to dynamically switch the buttons based on the
setting.
- Use mapper on the various activity screens.
- Update the button hints to reflect the swapped buttons.
## Additional Context
Full disclosure: I used Codex CLI to put this PR together, but did
review it to make sure it makes sense.
Also tested on my device:
https://share.cleanshot.com/k76891NY
## Summary
* **What is the goal of this PR?** Adds WiFi Access Point (AP) mode
support for File Transfer, allowing the device to create its own WiFi
network that users can connect to directly - useful when no existing
WiFi network is available. And in my experience is faster when the
device is right next to your laptop (but maybe further from your wifi)
* **What changes are included?**
- New `NetworkModeSelectionActivity` - an interstitial screen asking
users to choose between:
- "Join a Network" - connects to an existing WiFi network (existing
behavior)
- "Create Hotspot" - creates a WiFi access point named
"CrossPoint-Reader"
- Modified `CrossPointWebServerActivity` to:
- Launch the network mode selection screen before proceeding
- Support starting an Access Point with mDNS (`crosspoint.local`) and
DNS server for captive portal behavior
- Display appropriate connection info for both modes
- Modified `CrossPointWebServer` to support starting when WiFi is in AP
mode (not just STA connected mode)
## Additional Context
* **AP Mode Details**: The device creates an open WiFi network named
"CrossPoint-Reader". Once connected, users can access the file transfer
page at `http://crosspoint.local/` or `http://192.168.4.1/`
* **DNS Captive Portal**: A DNS server redirects all domain requests to
the device's IP, enabling captive portal behavior on some devices
* **mDNS**: Hostname resolution via `crosspoint.local` is enabled for
both AP and STA modes
* **No breaking changes**: The "Join a Network" option preserves the
existing WiFi connection flow
* **Memory impact**: Minimal - the AP mode uses roughly the same
resources as STA mode
## Summary
* Give activities name and log when entering and exiting them
* Clearer logs when attempting to debug, knowing where users are coming
from/going to helps
## Summary
- **What is the goal of this PR?**
Implements wireless EPUB file management via a built-in web server,
enabling users to upload, browse, organize, and delete EPUB files from
any device on the same WiFi network without needing a computer cable
connection.
- **What changes are included?**
- **New Web Server**
([`CrossPointWebServer.cpp`](src/CrossPointWebServer.cpp),
[`CrossPointWebServer.h`](src/CrossPointWebServer.h)):
- HTTP server on port 80 with a responsive HTML/CSS interface
- Home page showing device status (version, IP, free memory)
- File Manager with folder navigation and breadcrumb support
- EPUB file upload with progress tracking
- Folder creation and file/folder deletion
- XSS protection via HTML escaping
- Hidden system folders (`.` prefixed, "System Volume Information",
"XTCache")
- **WiFi Screen** ([`WifiScreen.cpp`](src/screens/WifiScreen.cpp),
[`WifiScreen.h`](src/screens/WifiScreen.h)):
- Network scanning with signal strength indicators
- Visual indicators for encrypted (`*`) and saved (`+`) networks
- State machine managing: scanning, network selection, password entry,
connecting, save/forget prompts
- 15-second connection timeout handling
- Integration with web server (starts on connect, stops on exit)
- **WiFi Credential Storage**
([`WifiCredentialStore.cpp`](src/WifiCredentialStore.cpp),
[`WifiCredentialStore.h`](src/WifiCredentialStore.h)):
- Persistent storage in `/sd/.crosspoint/wifi.bin`
- XOR obfuscation for stored passwords (basic protection against casual
reading)
- Up to 8 saved networks with add/remove/update operations
- **On-Screen Keyboard**
([`OnScreenKeyboard.cpp`](src/screens/OnScreenKeyboard.cpp),
[`OnScreenKeyboard.h`](src/screens/OnScreenKeyboard.h)):
- Reusable QWERTY keyboard component with shift support
- Special keys: Shift, Space, Backspace, Done
- Support for password masking mode
- **Settings Screen Integration**
([`SettingsScreen.h`](src/screens/SettingsScreen.h)):
- Added WiFi action to navigate to the new WiFi screen
- **Documentation** ([`docs/webserver.md`](docs/webserver.md)):
- Comprehensive user guide covering WiFi setup, web interface usage,
file management, troubleshooting, and security notes
- See this for more screenshots!
- Working "displays the right way in GitHub" on my repo:
https://github.com/olearycrew/crosspoint-reader/blob/feature/connect-to-wifi/docs/webserver.md
**Video demo**
https://github.com/user-attachments/assets/283e32dc-2d9f-4ae2-848e-01f41166a731
## Additional Context
- **Security considerations**: The web server has no
authentication—anyone on the same WiFi network can access files. This is
documented as a limitation, recommending use only on trusted private
networks. Password obfuscation in the credential store is XOR-based, not
cryptographically secure.
- **Memory implications**: The web server and WiFi stack consume
significant memory. The implementation properly cleans up (stops server,
disconnects WiFi, sets `WIFI_OFF` mode) when exiting the WiFi screen to
free resources.
- **Async operations**: Network scanning and connection use async
patterns with FreeRTOS tasks to prevent blocking the UI. The display
task handles rendering on a dedicated thread with mutex protection.
- **Browser compatibility**: The web interface uses standard
HTML5/CSS3/JavaScript and is tested to work with all modern browsers on
desktop and mobile.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
