Currently, each activity has to manage their own `displayTaskLoop` which
adds redundant boilerplate code. The loop is a wait loop which is also
not the best practice, as the `updateRequested` boolean is not protected
by a mutex.
In this PR:
- Move `displayTaskLoop` to the super `Activity` class
- Replace `updateRequested` with freeRTOS's [direct to task
notification](https://www.freertos.org/Documentation/02-Kernel/02-Kernel-features/03-Direct-to-task-notifications/01-Task-notifications)
- For `ActivityWithSubactivity`, whenever a sub-activity is present, the
parent's `render()` automatically goes inactive
With this change, activities now only need to expose `render()`
function, and anywhere in the code base can call `requestUpdate()` to
request a new rendering pass.
In theory, this change may also make the battery life a bit better,
since one wait loop is removed. Although the equipment in my home lab
wasn't been able to verify it (the electric current is too noisy and
small). Would appreciate if anyone has any insights on this subject.
Update: I managed to hack [a small piece of
code](https://github.com/ngxson/crosspoint-reader/tree/xsn/measure_cpu_usage)
that allow tracking CPU idle time.
The CPU load does decrease a bit (1.47% down to 1.39%), which make
sense, because the display task is now sleeping most of the time unless
notified. This should translate to a slightly increase in battery life
in the long run.
```
PR:
[40012] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[40012] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[50017] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[50017] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[60022] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[60022] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
master:
[20012] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[20012] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[30017] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[30017] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[40022] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[40022] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
```
---
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
* **Refactor**
* Streamlined rendering architecture by consolidating update mechanisms
across all activities, improving efficiency and consistency.
* Modernized synchronization patterns for display updates to ensure
reliable, conflict-free rendering.
* **Bug Fixes**
* Enhanced rendering stability through improved locking mechanisms and
explicit update requests.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Co-authored-by: znelson <znelson@users.noreply.github.com>
## Summary
* Definition and use of a central LOG function, that can later be
extended or completely be removed (for public use where debugging
information may not be required) to save flash by suppressing the
-DENABLE_SERIAL_LOG like in the slim branch
* **What changes are included?**
## Additional Context
* By using the central logger the usual:
```
#include <HardwareSerial.h>
...
Serial.printf("[%lu] [WCS] Obfuscating/deobfuscating %zu bytes\n", millis(), data.size());
```
would then become
```
#include <Logging.h>
...
LOG_DBG("WCS", "Obfuscating/deobfuscating %zu bytes", data.size());
```
You do have ``LOG_DBG`` for debug messages, ``LOG_ERR`` for error
messages and ``LOG_INF`` for informational messages. Depending on the
verbosity level defined (see below) soe of these message types will be
suppressed/not-compiled.
* The normal compilation (default) will create a firmware.elf file of
42.194.356 bytes, the same code via slim will create 42.024.048 bytes -
170.308 bytes less
* Firmware.bin : 6.469.984 bytes for default, 6.418.672 bytes for slim -
51.312 bytes less
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _NO_
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
## Summary
### What is the goal of this PR?
- Visual UI overhaul
- UI theme selection
### What changes are included?
- Added a setting "UI Theme": Classic, Lyra
- The classic theme is the current Crosspoint theme
- The Lyra theme implements these mockups:
https://www.figma.com/design/UhxoV4DgUnfrDQgMPPTXog/Lyra-Theme?node-id=2003-7596&t=4CSOZqf0n9uQMxDt-0
by Discord users yagofarias, ruby and gan_shu
- New functions in GFXRenderer to render rounded rectangles, greyscale
fills (using dithering) and thick lines
- Basic UI components are factored into BaseTheme methods which can be
overridden by each additional theme. Methods that are not overridden
will fallback to BaseTheme behavior. This means any new
features/components in CrossPoint only need to be developed for the
"Classic" BaseTheme.
- Additional themes can easily be developed by the community using this
foundation
## Additional Context
- Only the Home, Library and main Settings screens have been implemented
so far, this will be extended to the transfer screens and chapter
selection screen later on, but we need to get the ball rolling somehow
:)
- Loading extra covers on the home screen in the Lyra theme takes a
little more time (about 2 seconds), I added a loading bar popup (reusing
the Indexing progress bar from the reader view, factored into a neat UI
component) but the popup adds ~400ms to the loading time.
- ~~Home screen thumbnails will need to be generated separately for each
theme, because they are displayed in different sizes. Because we're
using dithering, displaying a thumb with the wrong size causes the
picture to look janky or dark as it does on the screenshots above. No
worries this will be fixed in a future PR.~~ Thumbs are now generated
with a size parameter
- UI Icons will need to be implemented in a future PR.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
This is not a vibe coded PR. Copilot was used for autocompletion to save
time but I reviewed, understood and edited all generated code.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Finally, I have received my device and got to chance to work on OTA.
https://github.com/crosspoint-reader/crosspoint-reader/issues/176
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Existing OTA functionality is very buggy, many of times (I would say 8
out of 10) are end up with fail for me. When the time that it works it
is very slow and take ages. For others looks like end up with crash or
different issues.
* **What changes are included?**
To be honest, I'm not familiar with Arduino APIs of OTA process, but
looks like not good as much esp-idf itself. I always found Arduino APIs
very bulky for esp32. Wrappers and wrappers.
## Additional Context
Right now, OTA takes ~ 3min 10sec (of course depends on size of .bin
file). Can be tested with playing version info inside from
`platform.ini` file.
```
[crosspoint]
version = 0.14.0
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
* Update EpdFontFamily::Style to be u8 instead of u32 (saving 3 bytes
per word)
* Update layout width/height to be u16 from int
* Update page element count to be u16 from u32
* Update text block element count to be u16 from u32
* Bumped section bin version to version 8
## Summary
- Update the button hints on the OTA update screen to reflect the
current front button layout.
- Update user guide to reflect current available settings. A lot has
been added recently!
## Summary
* Swap to updated SDCardManager which uses SdFat
* Add exFAT support
* Swap to using FsFile everywhere
* Use newly exposed `SdMan` macro to get to static instance of
SDCardManager
* Move a bunch of FsHelpers up to SDCardManager
## Summary
**What is the goal of this PR?**
Adds a setting to swap the front buttons. The default functionality are:
Back/Confirm/Left/Right. When this setting is enabled they become:
Left/Right/Back/Confirm. This makes it more comfortable to use when
holding in your right hand since your thumb can more easily rest on the
next button. The original firmware has a similar setting.
**What changes are included?**
- Add the new setting.
- Create a mapper to dynamically switch the buttons based on the
setting.
- Use mapper on the various activity screens.
- Update the button hints to reflect the swapped buttons.
## Additional Context
Full disclosure: I used Codex CLI to put this PR together, but did
review it to make sure it makes sense.
Also tested on my device:
https://share.cleanshot.com/k76891NY
## Summary
* Adds support for OTA
* Gets latest firmware bin from latest GitHub release
* I have noticed it be a little flaky unpacking the JSON and
occasionally failing to start
