crosspoint-reader-mod/USER_GUIDE.md

CrossPoint User Guide

Welcome to the CrossPoint firmware. This guide outlines the hardware controls, navigation, and reading features of the device.

• CrossPoint User Guide
  • 1. Hardware Overview
    • Button Layout
  • 2. Power & Startup
    • Power On / Off
    • First Launch
  • 3. Screens
    • 3.1 Home Screen
    • 3.2 Reading Mode
    • 3.3 Browse Files Screen
    • 3.4 Recent Books Screen
    • 3.5 File Transfer Screen
      • 3.5.1 Calibre Wireless Transfers
    • 3.6 Settings
      • 3.6.1 Display
      • 3.6.2 Reader
      • 3.6.3 Controls
      • 3.6.4 System
    • 3.7 Sleep Screen
  • 4. Reading Mode
    • Page Turning
    • Chapter Navigation
    • System Navigation
    • Supported Languages
  • 5. Chapter Selection Screen
  • 6. Current Limitations & Roadmap
  • 7. Troubleshooting Issues & Escaping Bootloop

1. Hardware Overview

The device utilises the standard buttons on the Xteink X4 (in the same layout as the manufacturer firmware, by default):

Button Layout

Location	Buttons
Bottom Edge	Back, Confirm, Left, Right
Right Side	Power, Volume Up, Volume Down, Reset

Button layout can be customized in the Controls Settings.

Taking a Screenshot

When the Power Button and Volume Down button are pressed at the same time, it will take a screenshot and save it in the folder screenshots/.

Alternatively, while reading a book, press the Confirm button to open the reader menu and select Take screenshot.

---

2. Power & Startup

Power On / Off

To turn the device on or off, press and hold the Power button for approximately half a second. In the Controls Settings you can configure the power button to turn the device off with a short press instead of a long one.

To reboot the device (for example after a firmware update or if it's frozen), press and release the Reset button, and then quickly press and hold the Power button for a few seconds.

First Launch

Upon turning the device on for the first time, you will be placed on the Home screen.

Note

On subsequent restarts, the firmware will automatically reopen the last book you were reading.

---

3. Screens

3.1 Home Screen

The Home screen is the main entry point to the firmware. From here you can navigate to Reading Mode with the most recently read book, the Browse Files screen, the Recent Books screen, the File Transfer screen, or Settings.

3.2 Reading Mode

See Reading Mode below for more information.

3.3 Browse Files Screen

The Browse Files screen acts as a file and folder browser.

• Navigate List: Use Left (or Volume Up), or Right (or Volume Down) to move the selection cursor up and down through folders and books. You can also long-press these buttons to scroll a full page up or down.
• Open Selection: Press Confirm to open a folder or read a selected book.

3.4 Recent Books Screen

The Recent Books screen lists the most recently opened books in a chronological view, displaying title and author.

3.5 File Transfer Screen

The File Transfer screen allows you to upload new e-books to the device. When you enter the screen, you'll be prompted with a WiFi selection dialog and then your X4 will start hosting a web server.

See the webserver docs for more information on how to connect to the web server and upload files.

Tip

Advanced users can also manage files programmatically or via the command line using curl. See the webserver docs for details.

3.5.1 Calibre Wireless Transfers

CrossPoint supports sending books from Calibre using the CrossPoint Reader device plugin.

1. Install the plugin in Calibre:
   • Head to https://github.com/crosspoint-reader/calibre-plugins/releases to download the latest version of the crosspoint_reader plugin.
   • Download the zip file.
   • Open Calibre → Preferences → Plugins → Load plugin from file → Select the zip file.
2. On the device: File Transfer → Connect to Calibre → Join a network.
3. Make sure your computer is on the same WiFi network.
4. In Calibre, click "Send to device" to transfer books.

3.6 Settings

The Settings screen allows you to configure the device's behavior. There are a few settings you can adjust:

3.6.1 Display

• Sleep Screen: Which sleep screen to display when the device sleeps:

  • "Dark" (default) - The default dark Crosspoint logo sleep screen
  • "Light" - The same default sleep screen, on a white background
  • "Custom" - Custom images from the SD card; see Sleep Screen below for more information
  • "Cover" - The book cover image (Note: this is experimental and may not work as expected)
  • "None" - A blank screen
  • "Cover + Custom" - The book cover image, falls back to "Custom" behavior

• Sleep Screen Cover Mode: How to display the book cover when "Cover" sleep screen is selected:

  • "Fit" (default) - Scale the image down to fit centered on the screen, padding with white borders as necessary
  • "Crop" - Scale the image down and crop as necessary to try to fill the screen (Note: this is experimental and may not work as expected)

• Sleep Screen Cover Filter: What filter will be applied to the book cover when "Cover" sleep screen is selected:

  • "None" (default) - The cover image will be converted to a grayscale image and displayed as it is
  • "Contrast" - The image will be displayed as a black & white image without grayscale conversion
  • "Inverted" - The image will be inverted as in white & black and will be displayed without grayscale conversion

• Status Bar: Configure the status bar displayed while reading:

  • "None" - No status bar
  • "No Progress" - Show status bar without reading progress
  • "Full w/ Percentage" - Show status bar with book progress (as percentage)
  • "Full w/ Book Bar" - Show status bar with book progress (as bar)
  • "Book Bar Only" - Show book progress (as bar)
  • "Full w/ Chapter Bar" - Show status bar with chapter progress (as bar)

• Hide Battery %: Configure where to suppress the battery percentage display in the status bar; the battery icon will still be shown:

  • "Never" (default) - Always show battery percentage
  • "In Reader" - Show battery percentage everywhere except in reading mode
  • "Always" - Always hide battery percentage

• Refresh Frequency: Set how often the screen does a full refresh while reading to reduce ghosting; options are every 1, 5, 10, 15, or 30 pages.

• UI Theme: Set which UI theme to use:

  • "Classic" - The original Crosspoint theme
  • "Lyra" - The new theme for Crosspoint featuring rounded elements and menu icons
  • "Lyra Extended" - Lyra, but displays 3 books instead of 1 on the Home Screen

• Sunlight Fading Fix: Configure whether to enable a software-fix for the issue where white X4 models may fade when used in direct sunlight:

  • "OFF" (default) - Disable the fix
  • "ON" - Enable the fix

3.6.2 Reader

• Reader Font Family: Choose the font used for reading:

  • "Bookerly" (default) - Amazon's reading font
  • "Noto Sans" - Google's sans-serif font
  • "Open Dyslexic" - Font designed for readers with dyslexia

• UI Font Size: Adjust the text size for reading; options are "Small", "Medium" (default), "Large", or "X Large".

• Reader Line Spacing: Adjust the spacing between lines; options are "Tight", "Normal" (default), or "Wide".

• Reader Screen Margin: Controls the screen margins in Reading Mode between 5 and 40 pixels in 5-pixel increments.

• Reader Paragraph Alignment: Set the alignment of paragraphs; options are "Justified" (default), "Left", "Center", or "Right".

• Embedded Style: Whether to use the EPUB file's embedded HTML and CSS stylisation and formatting; options are "ON" or "OFF".

• Hyphenation: Whether to hyphenate text in Reading Mode; options are "ON" or "OFF".

• Reading Orientation: Set the screen orientation for reading EPUB files:

  • "Portrait" (default) - Standard portrait orientation
  • "Landscape CW" - Landscape, rotated clockwise
  • "Inverted" - Portrait, upside down
  • "Landscape CCW" - Landscape, rotated counter-clockwise

• Extra Paragraph Spacing: Set how to handle paragraph breaks:

  • "ON" - Vertical space will be added between paragraphs in Reading Mode
  • "OFF" - Paragraphs will not have vertical space added, but will have first-line indentation

• Text Anti-Aliasing: Whether to show smooth grey edges (anti-aliasing) on text in reading mode. Note this slows down page turns slightly.

3.6.3 Controls

• Remap Front Buttons: A menu for customising the function of each bottom edge button.

• Side Button Layout (reader): Swap the order of the up and down volume buttons from "Prev/Next" (default) to "Next/Prev". This change is only in effect when reading.

• Long-press Chapter Skip: Set whether long-pressing page turn buttons skips to the next/previous chapter:

  • "Chapter Skip" (default) - Long-pressing skips to next/previous chapter
  • "Page Scroll" - Long-pressing scrolls a page up/down

• Short Power Button Click: Controls the effect of a short click of the power button:

  • "Ignore" (default) - Require a long press to turn off the device
  • "Sleep" - A short press puts the device into sleep mode
  • "Page Turn" - A short press in reading mode turns to the next page; a long press turns the device off

3.6.4 System

• Time to Sleep: Set the duration of inactivity before the device automatically goes to sleep; options are 1, 5, 10 (default), 15 or 30 minutes.

• WiFi Networks: Connect to WiFi networks for file transfers and firmware updates.

• KOReader Sync: Options for setting up KOReader for syncing book progress.

• OPDS Browser: Configure OPDS server settings for browsing and downloading books. Set the server URL (for Calibre Content Server, add /opds to the end), and optionally configure username and password for servers requiring authentication. Note: Only HTTP Basic authentication is supported. If using Calibre Content Server with authentication enabled, you must set it to use Basic authentication instead of the default Digest authentication.

• Clear Reading Cache: Clear the internal SD card cache.

• Check for updates: Check for Crosspoint firmware updates over WiFi.

• Language: Set the system language (see Supported Languages for more information).

3.7 Sleep Screen

You can customize the sleep screen by placing custom images in specific locations on the SD card:

• Single Image: Place a file named sleep.bmp in the root directory.
• Multiple Images: Create a sleep directory in the root of the SD card and place any number of .bmp images inside. If images are found in this directory, they will take priority over the sleep.bmp file, and one will be randomly selected each time the device sleeps.

Note

You'll need to set the Sleep Screen setting to Custom in order to use these images.

Tip

For best results:

• Use uncompressed BMP files with 24-bit color depth
• Use a resolution of 480x800 pixels to match the device's screen resolution.

---

4. Reading Mode

Once you have opened a book, the button layout changes to facilitate reading.

Page Turning

Action	Buttons
Previous Page	Press Left or Volume Up
Next Page	Press Right or Volume Down

The role of the volume (side) buttons can be swapped in the Controls Settings.

If the Short Power Button Click setting is set to "Page Turn", you can also turn to the next page by briefly pressing the Power button.

Chapter Navigation

• Next Chapter: Press and hold the Right (or Volume Down) button briefly, then release.
• Previous Chapter: Press and hold the Left (or Volume Up) button briefly, then release.

This feature can be disabled in the Controls Settings to help avoid changing chapters by mistake.

System Navigation

• Return to Home: Press the Back button to close the book and return to the Home screen.
• Return to Browse Files: Press and hold the Back button to close the book and return to the Browse Files screen.
• Chapter Menu: Press Confirm to open the Table of Contents/Chapter Selection screen.

Supported Languages

CrossPoint renders text using the following Unicode character blocks, enabling support for a wide range of languages:

• Latin Script (Basic, Supplement, Extended-A): Covers English, German, French, Spanish, Portuguese, Italian, Dutch, Swedish, Norwegian, Danish, Finnish, Polish, Czech, Hungarian, Romanian, Slovak, Slovenian, Turkish, and others.
• Cyrillic Script (Standard and Extended): Covers Russian, Ukrainian, Belarusian, Bulgarian, Serbian, Macedonian, Kazakh, Kyrgyz, Mongolian, and others.

What is not supported: Chinese, Japanese, Korean, Vietnamese, Hebrew, Arabic, Greek and Farsi.

---

5. Chapter Selection Screen

Accessible by pressing Confirm while inside a book.

1. Use Left (or Volume Up), or Right (or Volume Down) to highlight the desired chapter.
2. Press Confirm to jump to that chapter.
3. Alternatively, press Back to cancel and return to your current page.

---

6. Current Limitations & Roadmap

Please note that this firmware is currently in active development. The following features are not yet supported but are planned for future updates:

• Images: Embedded images in e-books will not render.
• Cover Images: Large cover images embedded into EPUB require several seconds (~10s for ~2000 pixel tall image) to convert for sleep screen and home screen thumbnail. Consider optimizing the EPUB with e.g. https://github.com/bigbag/epub-to-xtc-converter to speed this up.

---

7. Troubleshooting Issues & Escaping Bootloop

If an issue or crash is encountered while using Crosspoint, feel free to raise an issue ticket and attach the serial monitor logs. The logs can be obtained by connecting the device to a computer and starting a serial monitor. Either Serial Monitor or the following command can be used:

pio device monitor

If the device is stuck in a bootloop, press and release the Reset button. Then, press and hold on to the configured Back button and the Power Button to boot to the Home Screen.

There can be issues with broken cache or config. In this case, delete the .crosspoint directory on your SD card (or consider deleting only settings.bin, state.bin, or epub_* cache directories in the .crosspoint/ folder).