## Summary
Fixes https://github.com/crosspoint-reader/crosspoint-reader/issues/1011
Use double FAST_REFRESH for image pages to prevent grayscale washout,
HALF_REFRESH sets e-ink particles too firmly for the grayscale LUT to
adjust, causing washed-out images (especially large, light-gray ones).
Replace HALF_REFRESH with @pablohc's double FAST_REFRESH technique:
blank only the image bounding box area, then re-render with images. This
clears ghosting while keeping particles loosely set for grayscale.
## Additional Context
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
1. Go to the first page in a .epub file.
2. Hit `Up` button
3. Get teleported to the last page :)
`TxtRenderActivity` seems to have this if check, but EPUB one does not.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
**What is the goal of this PR?**
Compress reader font bitmaps to reduce flash usage by 30.7%.
**What changes are included?**
- New `EpdFontGroup` struct and extended `EpdFontData` with
`groups`/`groupCount` fields
- `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group
+ groups of 8) and compresses each with raw DEFLATE
- `FontDecompressor` class with 4-slot LRU cache for on-demand
decompression during rendering
- `GfxRenderer` transparently routes bitmap access through
`getGlyphBitmap()` (compressed or direct flash)
- Uses `uzlib` for decompression with minimal heap overhead.
- 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated
with compression; 5 UI fonts unchanged
- Round-trip verification script (`verify_compression.py`) runs as part
of font generation
## Additional Context
## Flash & RAM
| | baseline | font-compression | Difference |
|--|--------|-----------------|------------|
| Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B
(-30.7%) |
| firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) |
| RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) |
## Script-Based Grouping (Cold Cache)
Comparison of uncompressed baseline vs script-based group compression
(4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode
block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic,
General Punctuation, etc.) instead of sequential groups of 8.
### Render Time
| | Baseline | Compressed (cold cache) | Difference |
|---|---|---|---|
| **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) |
| **Pages** | 37 | 37 | |
### Memory Usage
| | Baseline | Compressed (cold cache) | Difference |
|---|---|---|---|
| **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB |
| **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB |
| **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB |
| **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB |
### Cache Effectiveness
| | Misses/page | Hit rate |
|---|---|---|
| **Compressed (cold cache)** | 2.1 | 99.85% |
------
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
Implementation was done by Claude Code (Opus 4.6) based on a plan
developed collaboratively. All generated font headers were verified with
an automated round-trip decompression test. The firmware was compiled
successfully but has not yet been tested on-device.
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Issues solved: #729 and #739
## Summary
* **What is the goal of this PR?**
Currently, the battery icon and charge percentage were aligned to the
left even for the UI, where they were positioned on the right side of
the screen. This meant that when changing values of different numbers of
digits, the battery would shift, creating a block of icons and text that
was illegible.
* **What changes are included?**
- Add drawBatteryUi() method for right-aligned battery display in UI
headers
- Keep drawBattery() for left-aligned display in reader mode
- Extract drawBatteryIcon() helper to reduce code duplication
- Battery icon now stays fixed at right edge regardless of percentage
digits
- Text adjusts to left of icon in UI mode, to right of icon in reader
mode
## Additional Context
* Add any other information that might be helpful for the reviewer
* This fix applies to both themes (Base and Lyra).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
## Summary
**What is the goal of this PR?**
This PR introduces Internationalization (i18n) support, enabling users
to switch the UI language dynamically.
**What changes are included?**
- Core Logic: Added I18n class (`lib/I18n/I18n.h/cpp`) to manage
language state and string retrieval.
- Data Structures:
- `lib/I18n/I18nStrings.h/cpp`: Static string arrays for each supported
language.
- `lib/I18n/I18nKeys.h`: Enum definitions for type-safe string access.
- `lib/I18n/translations.csv`: single source of truth.
- Documentation: Added `docs/i18n.md` detailing the workflow for
developers and translators.
- New Settings activity:
`src/activities/settings/LanguageSelectActivity.h/cpp`
## Additional Context
This implementation (building on concepts from #505) prioritizes
performance and memory efficiency.
The core approach is to store all localized strings for each language in
dedicated arrays and access them via enums. This provides O(1) access
with zero runtime overhead, and avoids the heap allocations, hashing,
and collision handling required by `std::map` or `std::unordered_map`.
The main trade-off is that enums and string arrays must remain perfectly
synchronized—any mismatch would result in incorrect strings being
displayed in the UI.
To eliminate this risk, I added a Python script that automatically
generates `I18nStrings.h/.cpp` and `I18nKeys.h` from a CSV file, which
will serve as the single source of truth for all translations. The full
design and workflow are documented in `docs/i18n.md`.
### Next Steps
- [x] Python script `generate_i18n.py` to auto-generate C++ files from
CSV
- [x] Populate translations.csv with initial translations.
Currently available translations: English, Español, Français, Deutsch,
Čeština, Português (Brasil), Русский, Svenska.
Thanks, community!
**Status:** EDIT: ready to be merged.
As a proof of concept, the SPANISH strings currently mirror the English
ones, but are fully uppercased.
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY >**_
I used AI for the black work of replacing strings with I18n references
across the project, and for generating the documentation. EDIT: also
some help with merging changes from master.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: yeyeto2788 <juanernestobiondi@gmail.com>
## Summary
Follow-up to
https://github.com/crosspoint-reader/crosspoint-reader/pull/774
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
## Release Notes
* **Refactor**
* Modernized internal synchronization mechanisms across multiple
components to improve code reliability and maintainability. All
functionality remains unchanged.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Summary
Currently, each activity has to manage their own `displayTaskLoop` which
adds redundant boilerplate code. The loop is a wait loop which is also
not the best practice, as the `updateRequested` boolean is not protected
by a mutex.
In this PR:
- Move `displayTaskLoop` to the super `Activity` class
- Replace `updateRequested` with freeRTOS's [direct to task
notification](https://www.freertos.org/Documentation/02-Kernel/02-Kernel-features/03-Direct-to-task-notifications/01-Task-notifications)
- For `ActivityWithSubactivity`, whenever a sub-activity is present, the
parent's `render()` automatically goes inactive
With this change, activities now only need to expose `render()`
function, and anywhere in the code base can call `requestUpdate()` to
request a new rendering pass.
## Additional Context
In theory, this change may also make the battery life a bit better,
since one wait loop is removed. Although the equipment in my home lab
wasn't been able to verify it (the electric current is too noisy and
small). Would appreciate if anyone has any insights on this subject.
Update: I managed to hack [a small piece of
code](https://github.com/ngxson/crosspoint-reader/tree/xsn/measure_cpu_usage)
that allow tracking CPU idle time.
The CPU load does decrease a bit (1.47% down to 1.39%), which make
sense, because the display task is now sleeping most of the time unless
notified. This should translate to a slightly increase in battery life
in the long run.
```
PR:
[40012] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[40012] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[50017] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[50017] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
[60022] [MEM] Free: 185856 bytes, Total: 231004 bytes, Min Free: 123316 bytes
[60022] [IDLE] Idle time: 98.61% (CPU load: 1.39%)
master:
[20012] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[20012] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[30017] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[30017] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[40022] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[40022] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Refactor**
* Streamlined rendering architecture by consolidating update mechanisms
across all activities, improving efficiency and consistency.
* Modernized synchronization patterns for display updates to ensure
reliable, conflict-free rendering.
* **Bug Fixes**
* Enhanced rendering stability through improved locking mechanisms and
explicit update requests.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Co-authored-by: znelson <znelson@users.noreply.github.com>
## Summary
- Add embedded image support to EPUB rendering with JPEG and PNG
decoders
- Implement pixel caching system to cache decoded/dithered images to SD
card for faster re-rendering
- Add 4-level grayscale support for display
## Changes
### New Image Rendering System
- Add `ImageBlock` class to represent an image with its cached path and
display dimensions
- Add `PageImage` class as a new `PageElement` type for images on pages
- Add `ImageToFramebufferDecoder` interface for format-specific image
decoders
- Add `JpegToFramebufferConverter` - JPEG decoder with Bayer dithering
and scaling
- Add `PngToFramebufferConverter` - PNG decoder with Bayer dithering and
scaling
- Add `ImageDecoderFactory` to select appropriate decoder based on file
extension
- Add `getRenderMode()` to GfxRenderer for grayscale render mode queries
### Dithering and Grayscale
- Implement 4x4 Bayer ordered dithering for 4-level grayscale output
- Stateless algorithm works correctly with MCU block decoding
- Handles scaling without artifacts
- Add grayscale render mode support (BW, GRAYSCALE_LSB, GRAYSCALE_MSB)
- Image decoders and cache renderer respect current render mode
- Enables proper 4-level e-ink grayscale when anti-aliasing is enabled
### Pixel Caching
- Cache decoded/dithered images to `.pxc` files on SD card
- Cache format: 2-bit packed pixels (4 pixels per byte) with
width/height header
- On subsequent renders, load directly from cache instead of re-decoding
- Cache renderer supports grayscale render modes for multi-pass
rendering
- Significantly improves page navigation speed for image-heavy EPUBs
### HTML Parser Integration
- Update `ChapterHtmlSlimParser` to process `<img>` tags and extract
images from EPUB
- Resolve relative image paths within EPUB ZIP structure
- Extract images to cache directory before decoding
- Create `PageImage` elements with proper scaling to fit viewport
- Fall back to alt text display if image processing fails
### Build Configuration
- Add `PNG_MAX_BUFFERED_PIXELS=6402` to support up to 800px wide images
### Test Script
- Generate test EPUBs with annotated JPEG and PNG images
- Test cases cover: grayscale (4 levels), centering, scaling, cache
performance
## Test plan
- [x] Open EPUB with JPEG images - verify images display with proper
grayscale
- [x] Open EPUB with PNG images - verify images display correctly and no
crash
- [x] Navigate away from image page and back - verify faster load from
cache
- [x] Verify grayscale tones render correctly (not just black/white
dithering)
- [x] Verify large images are scaled down to fit screen
- [x] Verify images are centered horizontally
- [x] Verify page serialization/deserialization works with images
- [x] Verify images rendered in landscape mode
## Test Results
[png](https://photos.app.goo.gl/5zFUb8xA8db3dPd19)
[jpeg](https://photos.app.goo.gl/SwtwaL2DSQwKybhw7)
---
### AI Usage
Did you use AI tools to help write this code? _**< YES >**_
---------
Co-authored-by: Matthías Páll Gissurarson <mpg@mpg.is>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Definition and use of a central LOG function, that can later be
extended or completely be removed (for public use where debugging
information may not be required) to save flash by suppressing the
-DENABLE_SERIAL_LOG like in the slim branch
* **What changes are included?**
## Additional Context
* By using the central logger the usual:
```
#include <HardwareSerial.h>
...
Serial.printf("[%lu] [WCS] Obfuscating/deobfuscating %zu bytes\n", millis(), data.size());
```
would then become
```
#include <Logging.h>
...
LOG_DBG("WCS", "Obfuscating/deobfuscating %zu bytes", data.size());
```
You do have ``LOG_DBG`` for debug messages, ``LOG_ERR`` for error
messages and ``LOG_INF`` for informational messages. Depending on the
verbosity level defined (see below) soe of these message types will be
suppressed/not-compiled.
* The normal compilation (default) will create a firmware.elf file of
42.194.356 bytes, the same code via slim will create 42.024.048 bytes -
170.308 bytes less
* Firmware.bin : 6.469.984 bytes for default, 6.418.672 bytes for slim -
51.312 bytes less
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _NO_
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
## Summary
* Unify all serial port debug messages
## Additional Context
* All messages sent to the serial port now follow the "[timestamp]
[origin] payload" format (notable exception framework messages)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
Continue my changes to introduce the HAL infrastructure from
https://github.com/crosspoint-reader/crosspoint-reader/pull/522
This PR touches quite a lot of files, but most of them are just name
changing. It should not have any impacts to the end behavior.
## Additional Context
My plan is to firstly add this small shim layer, which sounds useless at
first, but then I'll implement an emulated driver which can be helpful
for testing and for development.
Currently, on my fork, I'm using a FS driver that allow "mounting" a
local directory from my computer to the device, much like the `-v` mount
option on docker. This allows me to quickly reset `.crosspoint`
directory if anything goes wrong. I plan to upstream this feature when
this PR get merged.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
* Inverts back button behaviour while reading - short press to go home,
long press to open file browser
## Additional Context
* It seems counterintuitive that going into a book from home screen and
pressing back doesn’t take you back to the home screen. With the recent
books now displayed in the home view and a separate recents view, going
directly to the file browser is less necessary.
Closes#712
## Summary
**What is the goal of this PR?**
- To add new settings for toggling on/off embedded CSS styles in the
reader. This gives more control and customization to the user over how
the ereader experience looks.
**What changes are included?**
- Added new "Embedded Style" option to the Reader settings
- Added new "Book's Style" option for "Paragraph Alignment"
- User's selected "Paragraph Alignment" will take precedence and
override the embedded CSS `text-align` property, _unless_ the user has
"Book's Style" set as their "Paragraph Alignment"
## Additional Context
https://github.com/user-attachments/assets/9e404b13-c7e0-41c7-9406-4715f389166a
Addresses feedback from the community about the new CSS feature:
https://github.com/crosspoint-reader/crosspoint-reader/pull/700
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_, Claude Code
## Summary
This pull request introduces a new "Chapter Progress Bar" mode to the
status bar, allowing users to track their progress within the current
chapter in addition to the existing book-level progress options. It also
unifies and increases the progress bar height for better visibility, and
updates the settings UI to support the new mode.
Closes#636
**Status Bar/Progress Bar Enhancements:**
* Added a new `CHAPTER_PROGRESS_BAR` mode to
`CrossPointSettings::STATUS_BAR_MODE`, and updated the settings UI to
allow users to select this mode.
[[1]](diffhunk://#diff-3af36372bb6233a83387a68091b5e0651c23585c7c0a95669ed893268ca709a8R34)
[[2]](diffhunk://#diff-c55df9ec3ade843be000ba463cb75aa3df27dc34620a56c248fc4cc4e917b34bL22-R23)
* Implemented `drawChapterProgressBar` in `ScreenComponents` and
integrated it into both EPUB and TXT reader activities, so the chapter
progress bar is displayed when the new mode is selected.
[[1]](diffhunk://#diff-be271778a942f7fab0d920acd73442512346ff811a4625c011275a7ca6be3a3eL51-R64)
[[2]](diffhunk://#diff-dd410cab3a363d78172706d2ad6591f327e9b5b05f314db405db31a667af03faL16-R20)
[[3]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682R518-R525)
[[4]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950R563-R567)
* Updated logic in EPUB and TXT reader activities to show the correct
progress bar, progress text, and battery indicator based on the selected
status bar mode, including the new chapter progress bar mode.
[[1]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682R470-R481)
[[2]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682L490-R503)
[[3]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950R522-R533)
[[4]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950L539-R548)
**UI/Visual Tweaks:**
* Increased the progress bar height from 4 to 6 pixels for improved
visibility, and refactored code to use the new constant.
[[1]](diffhunk://#diff-dd410cab3a363d78172706d2ad6591f327e9b5b05f314db405db31a667af03faL16-R20)
[[2]](diffhunk://#diff-82798dedbe135495e619d4aa27a4bef560c70c7663cf43148b67a26ddde45682L295-R295)
[[3]](diffhunk://#diff-471ba9d9eb65b1a8451d41246db2aa695a42ea4ae4762163adfda4c20fec0950L177-R177)
These changes collectively provide users with more granular progress
tracking options and a clearer visual indicator for reading progress.
## Additional Context
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* **What is the goal of this PR?**
Move the "Sync Progress" option from TOC (Chapter Selection) screen to
the Reader Menu, and fix use-after-free crashes related to callback
handling in activity lifecycle.
* **What changes are included?**
- Added "Sync Progress" as a menu item in `EpubReaderMenuActivity` (now
4 items: Go to Chapter, Sync Progress, Go Home, Delete Book Cache)
- Removed sync-related logic from `EpubReaderChapterSelectionActivity` -
TOC now only displays chapters
- Implemented `pendingGoHome` and `pendingSubactivityExit` flags in
`EpubReaderActivity` to safely handle activity destruction
- Fixed GO_HOME, DELETE_CACHE, and SYNC menu actions to use deferred
callbacks avoiding use-after-free
## Additional Context
* Root cause of crashes: callbacks like `onGoHome()` or `onCancel()`
invoked from activity handlers could destroy the current activity while
code was still executing, causing use-after-free and race conditions
with FreeRTOS display task.
* Solution: Deferred execution pattern - set flags and process them in
`loop()` after all nested activity loops have safely returned.
* Files changed: `EpubReaderMenuActivity.h`,
`EpubReaderActivity.h/.cpp`, `EpubReaderChapterSelectionActivity.h/.cpp`
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
Co-authored-by: danoooob <danoooob@example.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds Go To % action in Epub Reader menu with slider style percent
selector
<img width="860" height="1147" alt="image"
src="https://github.com/user-attachments/assets/a38ecc71-429e-40e8-94ac-37fb1509dbd9"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
* adds rotation setting in epub reader menu, actual rotation happens on
going back
* improves button hint drawing to draw correctly in all orientations
<img width="860" height="1147" alt="image"
src="https://github.com/user-attachments/assets/91ceeca6-729f-4304-b68a-e412f6e2c9a7"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Allows back button to be held to escape boot loops when reader
activity crashes and device attempts to boot to previous state
- Reduces the need of removing SD card and access to another device to
delete the `/.crosspoint/state.bin`
* **What changes are included?**
- Back button can be held while booting to boot to home screen
- Update of User Guide section to include this feature
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
## Summary
### What is the goal of this PR?
- Visual UI overhaul
- UI theme selection
### What changes are included?
- Added a setting "UI Theme": Classic, Lyra
- The classic theme is the current Crosspoint theme
- The Lyra theme implements these mockups:
https://www.figma.com/design/UhxoV4DgUnfrDQgMPPTXog/Lyra-Theme?node-id=2003-7596&t=4CSOZqf0n9uQMxDt-0
by Discord users yagofarias, ruby and gan_shu
- New functions in GFXRenderer to render rounded rectangles, greyscale
fills (using dithering) and thick lines
- Basic UI components are factored into BaseTheme methods which can be
overridden by each additional theme. Methods that are not overridden
will fallback to BaseTheme behavior. This means any new
features/components in CrossPoint only need to be developed for the
"Classic" BaseTheme.
- Additional themes can easily be developed by the community using this
foundation
## Additional Context
- Only the Home, Library and main Settings screens have been implemented
so far, this will be extended to the transfer screens and chapter
selection screen later on, but we need to get the ball rolling somehow
:)
- Loading extra covers on the home screen in the Lyra theme takes a
little more time (about 2 seconds), I added a loading bar popup (reusing
the Indexing progress bar from the reader view, factored into a neat UI
component) but the popup adds ~400ms to the loading time.
- ~~Home screen thumbnails will need to be generated separately for each
theme, because they are displayed in different sizes. Because we're
using dithering, displaying a thumb with the wrong size causes the
picture to look janky or dark as it does on the screenshots above. No
worries this will be fixed in a future PR.~~ Thumbs are now generated
with a size parameter
- UI Icons will need to be implemented in a future PR.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
This is not a vibe coded PR. Copilot was used for autocompletion to save
time but I reviewed, understood and edited all generated code.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Truncating chapter titles using utf8 safe functions (Cyrillic titles
were split mid codepoint)
* refactoring of lib/Utf8
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* refactors Indexing popups into ScreenComponents (they had different
implementations in different files)
* removes Indexing popup for small chapters
* only show Indexing popup (without progress bar) for large chapters
(using same minimum file size condition as for progress bar before)
## Additional Context
* Having to show even single popup message and redraw the screen slows
down the flow significantly
* Testing results:
* Opening large chapter with progress bar - 11 seconds
* Same chapter without progress bar, only single Indexing popup - 5
seconds
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
## Summary
* Adds a menu in the Epub reader
* The Chapter selection is moved there to pos 1 (so it can be reached by
double tapping the confirm button)
* A Go Home is there, too
* Most significantly, a function "Delete Book Cache" is added. This
returns to main (to avoid directly rebuilding cached items, eg. if this
is used to debug/develop other areas - and it's also easier ;))
Probably, the Sync function could now be moved from the Chapter
selection to this menu, too.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier
This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.
SD card HAL will be added via another PR, because it's a bit more
tricky.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
* **What is the goal of this PR?** Implement a metadata viewer for the
Recents screen
* **What changes are included?**
| Recents | Files |
| --- | --- |
| <img alt="image"
src="https://github.com/user-attachments/assets/e0f2d816-ddce-4a2e-bd4a-cd431d0e6532"
/> | <img alt="image"
src="https://github.com/user-attachments/assets/3225cdce-d501-4175-bc92-73cb8bfe7a41"
/> |
For the Files screen, I have not made any changes on purpose. For the
Recents screen, we now display the Book title and author. If it is a
file with no epub metadata like txt or md, we display the file name
without the file extension.
---
Did you use AI tools to help write this code? _**< YES >**_
Although I went trough all the code manually and made changes as well,
please be aware the majority of the code is AI generated.
---------
Co-authored-by: Eliz Kilic <elizk@google.com>
## Summary
* If long-press chapter skip is disabled, turn pages on button pressed,
not released
* Makes page turning snappier
* Refactors MappedInputManager for readability
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** This PR introduces a new "Status Bar"
mode that displays a visual progress bar at the bottom of the screen,
providing readers with a graphical indication of their position within
the book.
* **What changes are included?**
* **Settings**: Updated SettingsActivity to expand the "Status Bar"
configuration with a new option: Full w/ Progress Bar.
* **EPUB Reader**: Modified EpubReaderActivity to calculate the global
book progress and render a progress bar at the bottom of the viewable
area when the new setting is active.
* **TXT Reader**: Modified TxtReaderActivity to implement similar
progress bar rendering logic based on the current page and total page
count.
## Additional Context
* The progress bar is rendered with a height of 4 pixels at the very
bottom of the screen (adjusted for margins).
* The feature reuses the existing renderStatusBar logic but
conditionally draws the bar instead of (or in addition to) other
elements depending on the specific implementation details in each
reader.
* Renamed existing 'Full' mode to 'Full w/ Percentage'
* Added new 'Full w/ Progress Bar' option
<img
src="https://github.com/user-attachments/assets/08c0dd49-c64c-4d4d-9fbb-f576c02d05d9"
width="500">
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* Aims to fix Issue #220
* **What changes are included?**
- Increased size of `progress.bin` such that total page count of current
section can be stored
- Comparison of total page count is done to determine if reader settings
were changed
- New position/page number is calculated using percentage calculated
from read progress
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/504
- Reverts book progress % to showing as an integer instead of with a
decimal place
- This was changed to 1 decimal point of precision in
https://github.com/crosspoint-reader/crosspoint-reader/pull/232 from
what I can tell
- As this wasn't the primary intention of that PR, I'm assuming it was
left in accidentally
IMO having a decimal place of precision is too much for something as
vague as book completion percent. This de-clutters the status bar and
prevents extra updates as you change pages.
---
### AI Usage
YES
## Summary
Give space to the chapter title if we don't show battery percentage.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
# Summary
This PR introduces a reusable Tab Bar component and combines the Recent
Books and File Browser into a unified tabbed page called "My Library"
accessible from the Home screen.
## Features
### New Tab Bar Component
A flexible, reusable tab bar component added to `ScreenComponents` that
can be used throughout the application.
### New Scroll Indicator Component
A page position indicator for lists that span multiple pages.
**Features:**
- Up/down arrow indicators
- Current page fraction display (e.g., "1/3")
- Only renders when content spans multiple pages
### My Library Activity
A new unified view combining Recent Books and File Browser into a single
tabbed page.
**Tabs:**
- **Recent** - Shows recently opened books
- **Files** - Browse SD card directory structure
**Navigation:**
- Up/Down or Left/Right: Navigate through list items
- Left/Right (when first item selected): Switch between tabs
- Confirm: Open selected book or enter directory
- Back: Go up directory (Files tab) or return home
- Long press Back: Jump to root directory (Files tab)
**UI Elements:**
- Tab bar with selection indicator
- Scroll/page indicator on right side
- Side button hints (up/down arrows)
- Dynamic bottom button labels ("BACK" in subdirectories, "HOME" at
root)
## Tab Bar Usage
The tab bar component is designed to be reusable across different
activities. Here's how to use it:
### Basic Example
```cpp
#include "ScreenComponents.h"
void MyActivity::render() const {
renderer.clearScreen();
// Define tabs with labels and selection state
std::vector<TabInfo> tabs = {
{"Tab One", currentTab == 0}, // Selected when currentTab is 0
{"Tab Two", currentTab == 1}, // Selected when currentTab is 1
{"Tab Three", currentTab == 2} // Selected when currentTab is 2
};
// Draw tab bar at Y position 15, returns height of the tab bar
int tabBarHeight = ScreenComponents::drawTabBar(renderer, 15, tabs);
// Position your content below the tab bar
int contentStartY = 15 + tabBarHeight + 10; // Add some padding
// Draw content based on selected tab
if (currentTab == 0) {
renderTabOneContent(contentStartY);
} else if (currentTab == 1) {
renderTabTwoContent(contentStartY);
} else {
renderTabThreeContent(contentStartY);
}
renderer.displayBuffer();
}
```
Video Demo: https://share.cleanshot.com/P6NBncFS
<img width="250"
src="https://github.com/user-attachments/assets/07de4418-968e-4a88-9b42-ac5f53d8a832"
/>
<img width="250"
src="https://github.com/user-attachments/assets/e40201ed-dcc8-4568-b008-cd2bf13ebb2a"
/>
<img width="250"
src="https://github.com/user-attachments/assets/73db269f-e629-4696-b8ca-0b8443451a05"
/>
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds (optional) Hyphenation for English, French, German, Russian
languages
## Additional Context
* Included hyphenation dictionaries add approximately 280kb to the flash
usage (German alone takes 200kb)
* Trie encoded dictionaries are adopted from hypher project
(https://github.com/typst/hypher)
* Soft hyphens (and other explicit hyphens) take precedence over
dict-based hyphenation. Overall, the hyphenation rules are quite
aggressive, as I believe it makes more sense on our smaller screen.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
- Adds KOReader progress sync integration, allowing CrossPoint to sync
reading positions with other
KOReader-compatible devices
- Stores credentials securely with XOR obfuscation
- Uses KOReader's partial MD5 document hashing for cross-device book
matching
- Syncs position via percentage with estimated XPath for compatibility
# Features
- Settings: KOReader Username, Password, and Authenticate options
- Sync from chapters menu: "Sync Progress" option appears when
credentials are configured
- Bidirectional sync: Can apply remote progress or upload local progress
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Adds a new "Long-press Chapter Skip" toggle in Settings to control
whether holding the side buttons skips chapters.
I kept accidentally triggering chapter skips while reading, which caused
me to lose my place in the middle of long chapters.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to (additionally) map the forward page turn
onto the powerbutton when in `EPUBReaderActivity` and powerbutton short
press is not mapped to sleep mode. I find the powerbutton to be exactly
where my thumb is while reading so it is very convenient to map the
forwardpage turn to that. Maybe Im not alone with this ^^
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
Fixes https://github.com/daveallie/crosspoint-reader/issues/233
## Additional Context
By disabling the Text Anti-Aliasing in the settings, you can get faster
black-and-white page turns that work exactly like the stock firmware,
instead of having an additional flash after rendering (see issue linked
above for example).
Tested on the X4 and confirmed working.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to control the top left and right margins of
the reader screen in 4 sizes (5, 10, 20, 40 pt?) and defaults to `SMALL`
which is equivalent to the fixed margin of 5 that was already in use
before.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: ratedcounsel <hello@ratedcounsel.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
Add a new user setting for paragraph alignment, instead of hard-coding
full justification.
* **What changes are included?**
One new line in the settings screen, with 4 options
(justify/left/center/right). Default is justified since that's what it
was already. I personally only wanted to disable justification and use
"left", but I included the other options for completeness since they
were already supported.
## Additional Context
Tested on my X4 and looks as expected for each alignment.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Update EpdFontFamily::Style to be u8 instead of u32 (saving 3 bytes
per word)
* Update layout width/height to be u16 from int
* Update page element count to be u16 from u32
* Update text block element count to be u16 from u32
* Bumped section bin version to version 8
## Summary
* Swap from Aleo to Bookerly for wider glyph support
* Swap from Space Grotesk to a small Noto Sans
## Additional Context
* 0.11.0 swapped to Aleo which has a few issues (things like Cyrillic
support for eg)
This parses the guide section in the content.opf for text/start
references and jumps to this on first open of the book.
Currently, this behavior will be repeated in case the reader manually
jumps to Chapter 0 and then re-opens the book. IMO, this is an
acceptable edge case (for which I couldn't see a good fix other than to
drag a "first open" boolean around).
---------
Co-authored-by: Sam Davis <sam@sjd.co>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Add setting for line spacing to adjust space between lines
* Aleo is already a bit tighter than Noto Sans and Open Dyslexic, so
have adjusted the values to match, this can be tweaked in the future
## Summary
* Swap to updated SDCardManager which uses SdFat
* Add exFAT support
* Swap to using FsFile everywhere
* Use newly exposed `SdMan` macro to get to static instance of
SDCardManager
* Move a bunch of FsHelpers up to SDCardManager
## Summary
**What is the goal of this PR?**
Adds a setting to swap the front buttons. The default functionality are:
Back/Confirm/Left/Right. When this setting is enabled they become:
Left/Right/Back/Confirm. This makes it more comfortable to use when
holding in your right hand since your thumb can more easily rest on the
next button. The original firmware has a similar setting.
**What changes are included?**
- Add the new setting.
- Create a mapper to dynamically switch the buttons based on the
setting.
- Use mapper on the various activity screens.
- Update the button hints to reflect the swapped buttons.
## Additional Context
Full disclosure: I used Codex CLI to put this PR together, but did
review it to make sure it makes sense.
Also tested on my device:
https://share.cleanshot.com/k76891NY
## Summary
* Consolidate chapter page data into single file
* Header structure of the file stays the same, following the page count,
we now put a LUT offset
* The page data is all then appended to this file
* Finally the LUT is appended to the end of the file, and the page count
is updated
* This will also significantly improve the duration of cache cleanup
which takes a while to scan the directory and cleanup content
* Remove page file version as it's all tied up into the section file now
* Bumped section file version to 7
* Moved section content into sub directory
* Updated docs
## Additional Context
* Benchmarks:
* Generating 74 pages of content from a chapter in Jade Legacy took:
* master: 6,229ms
* this PR: 1,305ms
* Speedup of 79%
* Generating 207 pages of content from Livesuit book:
* With progress bar UI updates:
* master: 24,250ms
* this PR: 8,063ms
* Speedup of 67%
* Without progress bar UI updates:
* master: 13,055ms
* this PR: 3,600ms
* Speedup of 72%
## Summary
* Use font ascender height for baseline offset
* Previously was using font height, but when rendering the font (even
from y = 0), there would be a lot of top margin
* Font would also go below the "bottom of the line" as we were using the
full font height as the baseline
## Additional Context
* This caused some text to move around, I've fixed everything I can
* Notably it moves the first line of font a little closer to the top of
the page
