feat: add HalDisplay and HalGPIO (#522)

## Summary

Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier

This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.

SD card HAL will be added via another PR, because it's a bit more
tricky.

---

### AI Usage

While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.

Did you use AI tools to help write this code? **NO**

lib/GfxRenderer/GfxRenderer.cpp

@@ -10,19 +10,19 @@ void GfxRenderer::rotateCoordinates(const int x, const int y, int* rotatedX, int
       // Logical portrait (480x800) → panel (800x480)
       // Rotation: 90 degrees clockwise
       *rotatedX = y;
-      *rotatedY = EInkDisplay::DISPLAY_HEIGHT - 1 - x;
+      *rotatedY = HalDisplay::DISPLAY_HEIGHT - 1 - x;
       break;
     }
     case LandscapeClockwise: {
       // Logical landscape (800x480) rotated 180 degrees (swap top/bottom and left/right)
-      *rotatedX = EInkDisplay::DISPLAY_WIDTH - 1 - x;
-      *rotatedY = EInkDisplay::DISPLAY_HEIGHT - 1 - y;
+      *rotatedX = HalDisplay::DISPLAY_WIDTH - 1 - x;
+      *rotatedY = HalDisplay::DISPLAY_HEIGHT - 1 - y;
       break;
     }
     case PortraitInverted: {
       // Logical portrait (480x800) → panel (800x480)
       // Rotation: 90 degrees counter-clockwise
-      *rotatedX = EInkDisplay::DISPLAY_WIDTH - 1 - y;
+      *rotatedX = HalDisplay::DISPLAY_WIDTH - 1 - y;
       *rotatedY = x;
       break;
     }
@@ -36,7 +36,7 @@ void GfxRenderer::rotateCoordinates(const int x, const int y, int* rotatedX, int
 }
 
 void GfxRenderer::drawPixel(const int x, const int y, const bool state) const {
-  uint8_t* frameBuffer = einkDisplay.getFrameBuffer();
+  uint8_t* frameBuffer = display.getFrameBuffer();
 
   // Early return if no framebuffer is set
   if (!frameBuffer) {
@@ -49,14 +49,13 @@ void GfxRenderer::drawPixel(const int x, const int y, const bool state) const {
   rotateCoordinates(x, y, &rotatedX, &rotatedY);
 
   // Bounds checking against physical panel dimensions
-  if (rotatedX < 0 || rotatedX >= EInkDisplay::DISPLAY_WIDTH || rotatedY < 0 ||
-      rotatedY >= EInkDisplay::DISPLAY_HEIGHT) {
+  if (rotatedX < 0 || rotatedX >= HalDisplay::DISPLAY_WIDTH || rotatedY < 0 || rotatedY >= HalDisplay::DISPLAY_HEIGHT) {
     Serial.printf("[%lu] [GFX] !! Outside range (%d, %d) -> (%d, %d)\n", millis(), x, y, rotatedX, rotatedY);
     return;
   }
 
   // Calculate byte position and bit position
-  const uint16_t byteIndex = rotatedY * EInkDisplay::DISPLAY_WIDTH_BYTES + (rotatedX / 8);
+  const uint16_t byteIndex = rotatedY * HalDisplay::DISPLAY_WIDTH_BYTES + (rotatedX / 8);
   const uint8_t bitPosition = 7 - (rotatedX % 8);  // MSB first
 
   if (state) {
@@ -164,7 +163,7 @@ void GfxRenderer::drawImage(const uint8_t bitmap[], const int x, const int y, co
       break;
   }
   // TODO: Rotate bits
-  einkDisplay.drawImage(bitmap, rotatedX, rotatedY, width, height);
+  display.drawImage(bitmap, rotatedX, rotatedY, width, height);
 }
 
 void GfxRenderer::drawBitmap(const Bitmap& bitmap, const int x, const int y, const int maxWidth, const int maxHeight,
@@ -399,22 +398,20 @@ void GfxRenderer::fillPolygon(const int* xPoints, const int* yPoints, int numPoi
   free(nodeX);
 }
 
-void GfxRenderer::clearScreen(const uint8_t color) const { einkDisplay.clearScreen(color); }
+void GfxRenderer::clearScreen(const uint8_t color) const { display.clearScreen(color); }
 
 void GfxRenderer::invertScreen() const {
-  uint8_t* buffer = einkDisplay.getFrameBuffer();
+  uint8_t* buffer = display.getFrameBuffer();
   if (!buffer) {
     Serial.printf("[%lu] [GFX] !! No framebuffer in invertScreen\n", millis());
     return;
   }
-  for (int i = 0; i < EInkDisplay::BUFFER_SIZE; i++) {
+  for (int i = 0; i < HalDisplay::BUFFER_SIZE; i++) {
     buffer[i] = ~buffer[i];
   }
 }
 
-void GfxRenderer::displayBuffer(const EInkDisplay::RefreshMode refreshMode) const {
-  einkDisplay.displayBuffer(refreshMode);
-}
+void GfxRenderer::displayBuffer(const HalDisplay::RefreshMode refreshMode) const { display.displayBuffer(refreshMode); }
 
 std::string GfxRenderer::truncatedText(const int fontId, const char* text, const int maxWidth,
                                        const EpdFontFamily::Style style) const {
@@ -433,13 +430,13 @@ int GfxRenderer::getScreenWidth() const {
     case Portrait:
     case PortraitInverted:
       // 480px wide in portrait logical coordinates
-      return EInkDisplay::DISPLAY_HEIGHT;
+      return HalDisplay::DISPLAY_HEIGHT;
     case LandscapeClockwise:
     case LandscapeCounterClockwise:
       // 800px wide in landscape logical coordinates
-      return EInkDisplay::DISPLAY_WIDTH;
+      return HalDisplay::DISPLAY_WIDTH;
   }
-  return EInkDisplay::DISPLAY_HEIGHT;
+  return HalDisplay::DISPLAY_HEIGHT;
 }
 
 int GfxRenderer::getScreenHeight() const {
@@ -447,13 +444,13 @@ int GfxRenderer::getScreenHeight() const {
     case Portrait:
     case PortraitInverted:
       // 800px tall in portrait logical coordinates
-      return EInkDisplay::DISPLAY_WIDTH;
+      return HalDisplay::DISPLAY_WIDTH;
     case LandscapeClockwise:
     case LandscapeCounterClockwise:
       // 480px tall in landscape logical coordinates
-      return EInkDisplay::DISPLAY_HEIGHT;
+      return HalDisplay::DISPLAY_HEIGHT;
   }
-  return EInkDisplay::DISPLAY_WIDTH;
+  return HalDisplay::DISPLAY_WIDTH;
 }
 
 int GfxRenderer::getSpaceWidth(const int fontId) const {
@@ -653,17 +650,18 @@ void GfxRenderer::drawTextRotated90CW(const int fontId, const int x, const int y
   }
 }
 
-uint8_t* GfxRenderer::getFrameBuffer() const { return einkDisplay.getFrameBuffer(); }
+uint8_t* GfxRenderer::getFrameBuffer() const { return display.getFrameBuffer(); }
 
-size_t GfxRenderer::getBufferSize() { return EInkDisplay::BUFFER_SIZE; }
+size_t GfxRenderer::getBufferSize() { return HalDisplay::BUFFER_SIZE; }
 
-void GfxRenderer::grayscaleRevert() const { einkDisplay.grayscaleRevert(); }
+// unused
+// void GfxRenderer::grayscaleRevert() const { display.grayscaleRevert(); }
 
-void GfxRenderer::copyGrayscaleLsbBuffers() const { einkDisplay.copyGrayscaleLsbBuffers(einkDisplay.getFrameBuffer()); }
+void GfxRenderer::copyGrayscaleLsbBuffers() const { display.copyGrayscaleLsbBuffers(display.getFrameBuffer()); }
 
-void GfxRenderer::copyGrayscaleMsbBuffers() const { einkDisplay.copyGrayscaleMsbBuffers(einkDisplay.getFrameBuffer()); }
+void GfxRenderer::copyGrayscaleMsbBuffers() const { display.copyGrayscaleMsbBuffers(display.getFrameBuffer()); }
 
-void GfxRenderer::displayGrayBuffer() const { einkDisplay.displayGrayBuffer(); }
+void GfxRenderer::displayGrayBuffer() const { display.displayGrayBuffer(); }
 
 void GfxRenderer::freeBwBufferChunks() {
   for (auto& bwBufferChunk : bwBufferChunks) {
@@ -681,7 +679,7 @@ void GfxRenderer::freeBwBufferChunks() {
  * Returns true if buffer was stored successfully, false if allocation failed.
  */
 bool GfxRenderer::storeBwBuffer() {
-  const uint8_t* frameBuffer = einkDisplay.getFrameBuffer();
+  const uint8_t* frameBuffer = display.getFrameBuffer();
   if (!frameBuffer) {
     Serial.printf("[%lu] [GFX] !! No framebuffer in storeBwBuffer\n", millis());
     return false;
@@ -736,7 +734,7 @@ void GfxRenderer::restoreBwBuffer() {
     return;
   }
 
-  uint8_t* frameBuffer = einkDisplay.getFrameBuffer();
+  uint8_t* frameBuffer = display.getFrameBuffer();
   if (!frameBuffer) {
     Serial.printf("[%lu] [GFX] !! No framebuffer in restoreBwBuffer\n", millis());
     freeBwBufferChunks();
@@ -755,7 +753,7 @@ void GfxRenderer::restoreBwBuffer() {
     memcpy(frameBuffer + offset, bwBufferChunks[i], BW_BUFFER_CHUNK_SIZE);
   }
 
-  einkDisplay.cleanupGrayscaleBuffers(frameBuffer);
+  display.cleanupGrayscaleBuffers(frameBuffer);
 
   freeBwBufferChunks();
   Serial.printf("[%lu] [GFX] Restored and freed BW buffer chunks\n", millis());
@@ -766,9 +764,9 @@ void GfxRenderer::restoreBwBuffer() {
  * Use this when BW buffer was re-rendered instead of stored/restored.
  */
 void GfxRenderer::cleanupGrayscaleWithFrameBuffer() const {
-  uint8_t* frameBuffer = einkDisplay.getFrameBuffer();
+  uint8_t* frameBuffer = display.getFrameBuffer();
   if (frameBuffer) {
-    einkDisplay.cleanupGrayscaleBuffers(frameBuffer);
+    display.cleanupGrayscaleBuffers(frameBuffer);
   }
 }
 

lib/GfxRenderer/GfxRenderer.h

@@ -1,7 +1,7 @@
 #pragma once
 
-#include <EInkDisplay.h>
 #include <EpdFontFamily.h>
+#include <HalDisplay.h>
 
 #include <map>
 
@@ -21,11 +21,11 @@ class GfxRenderer {
 
  private:
   static constexpr size_t BW_BUFFER_CHUNK_SIZE = 8000;  // 8KB chunks to allow for non-contiguous memory
-  static constexpr size_t BW_BUFFER_NUM_CHUNKS = EInkDisplay::BUFFER_SIZE / BW_BUFFER_CHUNK_SIZE;
-  static_assert(BW_BUFFER_CHUNK_SIZE * BW_BUFFER_NUM_CHUNKS == EInkDisplay::BUFFER_SIZE,
+  static constexpr size_t BW_BUFFER_NUM_CHUNKS = HalDisplay::BUFFER_SIZE / BW_BUFFER_CHUNK_SIZE;
+  static_assert(BW_BUFFER_CHUNK_SIZE * BW_BUFFER_NUM_CHUNKS == HalDisplay::BUFFER_SIZE,
                 "BW buffer chunking does not line up with display buffer size");
 
-  EInkDisplay& einkDisplay;
+  HalDisplay& display;
   RenderMode renderMode;
   Orientation orientation;
   uint8_t* bwBufferChunks[BW_BUFFER_NUM_CHUNKS] = {nullptr};
@@ -36,7 +36,7 @@ class GfxRenderer {
   void rotateCoordinates(int x, int y, int* rotatedX, int* rotatedY) const;
 
  public:
-  explicit GfxRenderer(EInkDisplay& einkDisplay) : einkDisplay(einkDisplay), renderMode(BW), orientation(Portrait) {}
+  explicit GfxRenderer(HalDisplay& halDisplay) : display(halDisplay), renderMode(BW), orientation(Portrait) {}
   ~GfxRenderer() { freeBwBufferChunks(); }
 
   static constexpr int VIEWABLE_MARGIN_TOP = 9;
@@ -54,7 +54,7 @@ class GfxRenderer {
   // Screen ops
   int getScreenWidth() const;
   int getScreenHeight() const;
-  void displayBuffer(EInkDisplay::RefreshMode refreshMode = EInkDisplay::FAST_REFRESH) const;
+  void displayBuffer(HalDisplay::RefreshMode refreshMode = HalDisplay::FAST_REFRESH) const;
   // EXPERIMENTAL: Windowed update - display only a rectangular region
   void displayWindow(int x, int y, int width, int height) const;
   void invertScreen() const;

lib/hal/HalDisplay.cpp

@@ -0,0 +1,51 @@
+#include <HalDisplay.h>
+#include <HalGPIO.h>
+
+#define SD_SPI_MISO 7
+
+HalDisplay::HalDisplay() : einkDisplay(EPD_SCLK, EPD_MOSI, EPD_CS, EPD_DC, EPD_RST, EPD_BUSY) {}
+
+HalDisplay::~HalDisplay() {}
+
+void HalDisplay::begin() { einkDisplay.begin(); }
+
+void HalDisplay::clearScreen(uint8_t color) const { einkDisplay.clearScreen(color); }
+
+void HalDisplay::drawImage(const uint8_t* imageData, uint16_t x, uint16_t y, uint16_t w, uint16_t h,
+                           bool fromProgmem) const {
+  einkDisplay.drawImage(imageData, x, y, w, h, fromProgmem);
+}
+
+EInkDisplay::RefreshMode convertRefreshMode(HalDisplay::RefreshMode mode) {
+  switch (mode) {
+    case HalDisplay::FULL_REFRESH:
+      return EInkDisplay::FULL_REFRESH;
+    case HalDisplay::HALF_REFRESH:
+      return EInkDisplay::HALF_REFRESH;
+    case HalDisplay::FAST_REFRESH:
+    default:
+      return EInkDisplay::FAST_REFRESH;
+  }
+}
+
+void HalDisplay::displayBuffer(HalDisplay::RefreshMode mode) { einkDisplay.displayBuffer(convertRefreshMode(mode)); }
+
+void HalDisplay::refreshDisplay(HalDisplay::RefreshMode mode, bool turnOffScreen) {
+  einkDisplay.refreshDisplay(convertRefreshMode(mode), turnOffScreen);
+}
+
+void HalDisplay::deepSleep() { einkDisplay.deepSleep(); }
+
+uint8_t* HalDisplay::getFrameBuffer() const { return einkDisplay.getFrameBuffer(); }
+
+void HalDisplay::copyGrayscaleBuffers(const uint8_t* lsbBuffer, const uint8_t* msbBuffer) {
+  einkDisplay.copyGrayscaleBuffers(lsbBuffer, msbBuffer);
+}
+
+void HalDisplay::copyGrayscaleLsbBuffers(const uint8_t* lsbBuffer) { einkDisplay.copyGrayscaleLsbBuffers(lsbBuffer); }
+
+void HalDisplay::copyGrayscaleMsbBuffers(const uint8_t* msbBuffer) { einkDisplay.copyGrayscaleMsbBuffers(msbBuffer); }
+
+void HalDisplay::cleanupGrayscaleBuffers(const uint8_t* bwBuffer) { einkDisplay.cleanupGrayscaleBuffers(bwBuffer); }
+
+void HalDisplay::displayGrayBuffer() { einkDisplay.displayGrayBuffer(); }

lib/hal/HalDisplay.h

@@ -0,0 +1,52 @@
+#pragma once
+#include <Arduino.h>
+#include <EInkDisplay.h>
+
+class HalDisplay {
+ public:
+  // Constructor with pin configuration
+  HalDisplay();
+
+  // Destructor
+  ~HalDisplay();
+
+  // Refresh modes
+  enum RefreshMode {
+    FULL_REFRESH,  // Full refresh with complete waveform
+    HALF_REFRESH,  // Half refresh (1720ms) - balanced quality and speed
+    FAST_REFRESH   // Fast refresh using custom LUT
+  };
+
+  // Initialize the display hardware and driver
+  void begin();
+
+  // Display dimensions
+  static constexpr uint16_t DISPLAY_WIDTH = EInkDisplay::DISPLAY_WIDTH;
+  static constexpr uint16_t DISPLAY_HEIGHT = EInkDisplay::DISPLAY_HEIGHT;
+  static constexpr uint16_t DISPLAY_WIDTH_BYTES = DISPLAY_WIDTH / 8;
+  static constexpr uint32_t BUFFER_SIZE = DISPLAY_WIDTH_BYTES * DISPLAY_HEIGHT;
+
+  // Frame buffer operations
+  void clearScreen(uint8_t color = 0xFF) const;
+  void drawImage(const uint8_t* imageData, uint16_t x, uint16_t y, uint16_t w, uint16_t h,
+                 bool fromProgmem = false) const;
+
+  void displayBuffer(RefreshMode mode = RefreshMode::FAST_REFRESH);
+  void refreshDisplay(RefreshMode mode = RefreshMode::FAST_REFRESH, bool turnOffScreen = false);
+
+  // Power management
+  void deepSleep();
+
+  // Access to frame buffer
+  uint8_t* getFrameBuffer() const;
+
+  void copyGrayscaleBuffers(const uint8_t* lsbBuffer, const uint8_t* msbBuffer);
+  void copyGrayscaleLsbBuffers(const uint8_t* lsbBuffer);
+  void copyGrayscaleMsbBuffers(const uint8_t* msbBuffer);
+  void cleanupGrayscaleBuffers(const uint8_t* bwBuffer);
+
+  void displayGrayBuffer();
+
+ private:
+  EInkDisplay einkDisplay;
+};

lib/hal/HalGPIO.cpp

@@ -0,0 +1,55 @@
+#include <HalGPIO.h>
+#include <SPI.h>
+#include <esp_sleep.h>
+
+void HalGPIO::begin() {
+  inputMgr.begin();
+  SPI.begin(EPD_SCLK, SPI_MISO, EPD_MOSI, EPD_CS);
+  pinMode(BAT_GPIO0, INPUT);
+  pinMode(UART0_RXD, INPUT);
+}
+
+void HalGPIO::update() { inputMgr.update(); }
+
+bool HalGPIO::isPressed(uint8_t buttonIndex) const { return inputMgr.isPressed(buttonIndex); }
+
+bool HalGPIO::wasPressed(uint8_t buttonIndex) const { return inputMgr.wasPressed(buttonIndex); }
+
+bool HalGPIO::wasAnyPressed() const { return inputMgr.wasAnyPressed(); }
+
+bool HalGPIO::wasReleased(uint8_t buttonIndex) const { return inputMgr.wasReleased(buttonIndex); }
+
+bool HalGPIO::wasAnyReleased() const { return inputMgr.wasAnyReleased(); }
+
+unsigned long HalGPIO::getHeldTime() const { return inputMgr.getHeldTime(); }
+
+void HalGPIO::startDeepSleep() {
+  esp_deep_sleep_enable_gpio_wakeup(1ULL << InputManager::POWER_BUTTON_PIN, ESP_GPIO_WAKEUP_GPIO_LOW);
+  // Ensure that the power button has been released to avoid immediately turning back on if you're holding it
+  while (inputMgr.isPressed(BTN_POWER)) {
+    delay(50);
+    inputMgr.update();
+  }
+  // Enter Deep Sleep
+  esp_deep_sleep_start();
+}
+
+int HalGPIO::getBatteryPercentage() const {
+  static const BatteryMonitor battery = BatteryMonitor(BAT_GPIO0);
+  return battery.readPercentage();
+}
+
+bool HalGPIO::isUsbConnected() const {
+  // U0RXD/GPIO20 reads HIGH when USB is connected
+  return digitalRead(UART0_RXD) == HIGH;
+}
+
+bool HalGPIO::isWakeupByPowerButton() const {
+  const auto wakeupCause = esp_sleep_get_wakeup_cause();
+  const auto resetReason = esp_reset_reason();
+  if (isUsbConnected()) {
+    return wakeupCause == ESP_SLEEP_WAKEUP_GPIO;
+  } else {
+    return (wakeupCause == ESP_SLEEP_WAKEUP_UNDEFINED) && (resetReason == ESP_RST_POWERON);
+  }
+}

lib/hal/HalGPIO.h

@@ -0,0 +1,61 @@
+#pragma once
+
+#include <Arduino.h>
+#include <BatteryMonitor.h>
+#include <InputManager.h>
+
+// Display SPI pins (custom pins for XteinkX4, not hardware SPI defaults)
+#define EPD_SCLK 8   // SPI Clock
+#define EPD_MOSI 10  // SPI MOSI (Master Out Slave In)
+#define EPD_CS 21    // Chip Select
+#define EPD_DC 4     // Data/Command
+#define EPD_RST 5    // Reset
+#define EPD_BUSY 6   // Busy
+
+#define SPI_MISO 7  // SPI MISO, shared between SD card and display (Master In Slave Out)
+
+#define BAT_GPIO0 0  // Battery voltage
+
+#define UART0_RXD 20  // Used for USB connection detection
+
+class HalGPIO {
+#if CROSSPOINT_EMULATED == 0
+  InputManager inputMgr;
+#endif
+
+ public:
+  HalGPIO() = default;
+
+  // Start button GPIO and setup SPI for screen and SD card
+  void begin();
+
+  // Button input methods
+  void update();
+  bool isPressed(uint8_t buttonIndex) const;
+  bool wasPressed(uint8_t buttonIndex) const;
+  bool wasAnyPressed() const;
+  bool wasReleased(uint8_t buttonIndex) const;
+  bool wasAnyReleased() const;
+  unsigned long getHeldTime() const;
+
+  // Setup wake up GPIO and enter deep sleep
+  void startDeepSleep();
+
+  // Get battery percentage (range 0-100)
+  int getBatteryPercentage() const;
+
+  // Check if USB is connected
+  bool isUsbConnected() const;
+
+  // Check if wakeup was caused by power button press
+  bool isWakeupByPowerButton() const;
+
+  // Button indices
+  static constexpr uint8_t BTN_BACK = 0;
+  static constexpr uint8_t BTN_CONFIRM = 1;
+  static constexpr uint8_t BTN_LEFT = 2;
+  static constexpr uint8_t BTN_RIGHT = 3;
+  static constexpr uint8_t BTN_UP = 4;
+  static constexpr uint8_t BTN_DOWN = 5;
+  static constexpr uint8_t BTN_POWER = 6;
+};

src/MappedInputManager.cpp

@@ -19,20 +19,20 @@ struct SideLayoutMap {
 
 // Order matches CrossPointSettings::FRONT_BUTTON_LAYOUT.
 constexpr FrontLayoutMap kFrontLayouts[] = {
-    {InputManager::BTN_BACK, InputManager::BTN_CONFIRM, InputManager::BTN_LEFT, InputManager::BTN_RIGHT},
-    {InputManager::BTN_LEFT, InputManager::BTN_RIGHT, InputManager::BTN_BACK, InputManager::BTN_CONFIRM},
-    {InputManager::BTN_CONFIRM, InputManager::BTN_LEFT, InputManager::BTN_BACK, InputManager::BTN_RIGHT},
-    {InputManager::BTN_BACK, InputManager::BTN_CONFIRM, InputManager::BTN_RIGHT, InputManager::BTN_LEFT},
+    {HalGPIO::BTN_BACK, HalGPIO::BTN_CONFIRM, HalGPIO::BTN_LEFT, HalGPIO::BTN_RIGHT},
+    {HalGPIO::BTN_LEFT, HalGPIO::BTN_RIGHT, HalGPIO::BTN_BACK, HalGPIO::BTN_CONFIRM},
+    {HalGPIO::BTN_CONFIRM, HalGPIO::BTN_LEFT, HalGPIO::BTN_BACK, HalGPIO::BTN_RIGHT},
+    {HalGPIO::BTN_BACK, HalGPIO::BTN_CONFIRM, HalGPIO::BTN_RIGHT, HalGPIO::BTN_LEFT},
 };
 
 // Order matches CrossPointSettings::SIDE_BUTTON_LAYOUT.
 constexpr SideLayoutMap kSideLayouts[] = {
-    {InputManager::BTN_UP, InputManager::BTN_DOWN},
-    {InputManager::BTN_DOWN, InputManager::BTN_UP},
+    {HalGPIO::BTN_UP, HalGPIO::BTN_DOWN},
+    {HalGPIO::BTN_DOWN, HalGPIO::BTN_UP},
 };
 }  // namespace
 
-bool MappedInputManager::mapButton(const Button button, bool (InputManager::*fn)(uint8_t) const) const {
+bool MappedInputManager::mapButton(const Button button, bool (HalGPIO::*fn)(uint8_t) const) const {
   const auto frontLayout = static_cast<CrossPointSettings::FRONT_BUTTON_LAYOUT>(SETTINGS.frontButtonLayout);
   const auto sideLayout = static_cast<CrossPointSettings::SIDE_BUTTON_LAYOUT>(SETTINGS.sideButtonLayout);
   const auto& front = kFrontLayouts[frontLayout];
@@ -40,41 +40,39 @@ bool MappedInputManager::mapButton(const Button button, bool (InputManager::*fn)
 
   switch (button) {
     case Button::Back:
-      return (inputManager.*fn)(front.back);
+      return (gpio.*fn)(front.back);
     case Button::Confirm:
-      return (inputManager.*fn)(front.confirm);
+      return (gpio.*fn)(front.confirm);
     case Button::Left:
-      return (inputManager.*fn)(front.left);
+      return (gpio.*fn)(front.left);
     case Button::Right:
-      return (inputManager.*fn)(front.right);
+      return (gpio.*fn)(front.right);
     case Button::Up:
-      return (inputManager.*fn)(InputManager::BTN_UP);
+      return (gpio.*fn)(HalGPIO::BTN_UP);
     case Button::Down:
-      return (inputManager.*fn)(InputManager::BTN_DOWN);
+      return (gpio.*fn)(HalGPIO::BTN_DOWN);
     case Button::Power:
-      return (inputManager.*fn)(InputManager::BTN_POWER);
+      return (gpio.*fn)(HalGPIO::BTN_POWER);
     case Button::PageBack:
-      return (inputManager.*fn)(side.pageBack);
+      return (gpio.*fn)(side.pageBack);
     case Button::PageForward:
-      return (inputManager.*fn)(side.pageForward);
+      return (gpio.*fn)(side.pageForward);
   }
 
   return false;
 }
 
-bool MappedInputManager::wasPressed(const Button button) const { return mapButton(button, &InputManager::wasPressed); }
+bool MappedInputManager::wasPressed(const Button button) const { return mapButton(button, &HalGPIO::wasPressed); }
 
-bool MappedInputManager::wasReleased(const Button button) const {
-  return mapButton(button, &InputManager::wasReleased);
-}
+bool MappedInputManager::wasReleased(const Button button) const { return mapButton(button, &HalGPIO::wasReleased); }
 
-bool MappedInputManager::isPressed(const Button button) const { return mapButton(button, &InputManager::isPressed); }
+bool MappedInputManager::isPressed(const Button button) const { return mapButton(button, &HalGPIO::isPressed); }
 
-bool MappedInputManager::wasAnyPressed() const { return inputManager.wasAnyPressed(); }
+bool MappedInputManager::wasAnyPressed() const { return gpio.wasAnyPressed(); }
 
-bool MappedInputManager::wasAnyReleased() const { return inputManager.wasAnyReleased(); }
+bool MappedInputManager::wasAnyReleased() const { return gpio.wasAnyReleased(); }
 
-unsigned long MappedInputManager::getHeldTime() const { return inputManager.getHeldTime(); }
+unsigned long MappedInputManager::getHeldTime() const { return gpio.getHeldTime(); }
 
 MappedInputManager::Labels MappedInputManager::mapLabels(const char* back, const char* confirm, const char* previous,
                                                          const char* next) const {
@@ -91,4 +89,4 @@ MappedInputManager::Labels MappedInputManager::mapLabels(const char* back, const
     default:
       return {back, confirm, previous, next};
   }
-}
+}

src/MappedInputManager.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <InputManager.h>
+#include <HalGPIO.h>
 
 class MappedInputManager {
  public:
@@ -13,7 +13,7 @@ class MappedInputManager {
     const char* btn4;
   };
 
-  explicit MappedInputManager(InputManager& inputManager) : inputManager(inputManager) {}
+  explicit MappedInputManager(HalGPIO& gpio) : gpio(gpio) {}
 
   bool wasPressed(Button button) const;
   bool wasReleased(Button button) const;
@@ -24,7 +24,7 @@ class MappedInputManager {
   Labels mapLabels(const char* back, const char* confirm, const char* previous, const char* next) const;
 
  private:
-  InputManager& inputManager;
+  HalGPIO& gpio;
 
-  bool mapButton(Button button, bool (InputManager::*fn)(uint8_t) const) const;
+  bool mapButton(Button button, bool (HalGPIO::*fn)(uint8_t) const) const;
 };

src/activities/boot_sleep/SleepActivity.cpp

@@ -133,7 +133,7 @@ void SleepActivity::renderDefaultSleepScreen() const {
     renderer.invertScreen();
   }
 
-  renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+  renderer.displayBuffer(HalDisplay::HALF_REFRESH);
 }
 
 void SleepActivity::renderBitmapSleepScreen(const Bitmap& bitmap) const {
@@ -189,7 +189,7 @@ void SleepActivity::renderBitmapSleepScreen(const Bitmap& bitmap) const {
     renderer.invertScreen();
   }
 
-  renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+  renderer.displayBuffer(HalDisplay::HALF_REFRESH);
 
   if (hasGreyscale) {
     bitmap.rewindToData();
@@ -280,5 +280,5 @@ void SleepActivity::renderCoverSleepScreen() const {
 
 void SleepActivity::renderBlankSleepScreen() const {
   renderer.clearScreen();
-  renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+  renderer.displayBuffer(HalDisplay::HALF_REFRESH);
 }

src/activities/reader/EpubReaderActivity.cpp

@@ -345,7 +345,7 @@ void EpubReaderActivity::renderScreen() {
       auto progressCallback = [this, barX, barY, barWidth, barHeight](int progress) {
         const int fillWidth = (barWidth - 2) * progress / 100;
         renderer.fillRect(barX + 1, barY + 1, fillWidth, barHeight - 2, true);
-        renderer.displayBuffer(EInkDisplay::FAST_REFRESH);
+        renderer.displayBuffer(HalDisplay::FAST_REFRESH);
       };
 
       if (!section->createSectionFile(SETTINGS.getReaderFontId(), SETTINGS.getReaderLineCompression(),
@@ -428,7 +428,7 @@ void EpubReaderActivity::renderContents(std::unique_ptr<Page> page, const int or
   page->render(renderer, SETTINGS.getReaderFontId(), orientedMarginLeft, orientedMarginTop);
   renderStatusBar(orientedMarginRight, orientedMarginBottom, orientedMarginLeft);
   if (pagesUntilFullRefresh <= 1) {
-    renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+    renderer.displayBuffer(HalDisplay::HALF_REFRESH);
     pagesUntilFullRefresh = SETTINGS.getRefreshFrequency();
   } else {
     renderer.displayBuffer();

src/activities/reader/TxtReaderActivity.cpp

@@ -256,7 +256,7 @@ void TxtReaderActivity::buildPageIndex() {
       // Fill progress bar
       const int fillWidth = (barWidth - 2) * progressPercent / 100;
       renderer.fillRect(barX + 1, barY + 1, fillWidth, barHeight - 2, true);
-      renderer.displayBuffer(EInkDisplay::FAST_REFRESH);
+      renderer.displayBuffer(HalDisplay::FAST_REFRESH);
     }
 
     // Yield to other tasks periodically
@@ -484,7 +484,7 @@ void TxtReaderActivity::renderPage() {
   renderStatusBar(orientedMarginRight, orientedMarginBottom, orientedMarginLeft);
 
   if (pagesUntilFullRefresh <= 1) {
-    renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+    renderer.displayBuffer(HalDisplay::HALF_REFRESH);
     pagesUntilFullRefresh = SETTINGS.getRefreshFrequency();
   } else {
     renderer.displayBuffer();

src/activities/reader/XtcReaderActivity.cpp

@@ -276,7 +276,7 @@ void XtcReaderActivity::renderPage() {
 
     // Display BW with conditional refresh based on pagesUntilFullRefresh
     if (pagesUntilFullRefresh <= 1) {
-      renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+      renderer.displayBuffer(HalDisplay::HALF_REFRESH);
       pagesUntilFullRefresh = SETTINGS.getRefreshFrequency();
     } else {
       renderer.displayBuffer();
@@ -356,7 +356,7 @@ void XtcReaderActivity::renderPage() {
 
   // Display with appropriate refresh
   if (pagesUntilFullRefresh <= 1) {
-    renderer.displayBuffer(EInkDisplay::HALF_REFRESH);
+    renderer.displayBuffer(HalDisplay::HALF_REFRESH);
     pagesUntilFullRefresh = SETTINGS.getRefreshFrequency();
   } else {
     renderer.displayBuffer();

src/activities/util/FullScreenMessageActivity.h

@@ -1,6 +1,6 @@
 #pragma once
-#include <EInkDisplay.h>
 #include <EpdFontFamily.h>
+#include <HalDisplay.h>
 
 #include <string>
 #include <utility>
@@ -10,12 +10,12 @@
 class FullScreenMessageActivity final : public Activity {
   std::string text;
   EpdFontFamily::Style style;
-  EInkDisplay::RefreshMode refreshMode;
+  HalDisplay::RefreshMode refreshMode;
 
  public:
   explicit FullScreenMessageActivity(GfxRenderer& renderer, MappedInputManager& mappedInput, std::string text,
                                      const EpdFontFamily::Style style = EpdFontFamily::REGULAR,
-                                     const EInkDisplay::RefreshMode refreshMode = EInkDisplay::FAST_REFRESH)
+                                     const HalDisplay::RefreshMode refreshMode = HalDisplay::FAST_REFRESH)
       : Activity("FullScreenMessage", renderer, mappedInput),
         text(std::move(text)),
         style(style),

src/main.cpp

@@ -1,8 +1,8 @@
 #include <Arduino.h>
-#include <EInkDisplay.h>
 #include <Epub.h>
 #include <GfxRenderer.h>
-#include <InputManager.h>
+#include <HalDisplay.h>
+#include <HalGPIO.h>
 #include <SDCardManager.h>
 #include <SPI.h>
 #include <builtinFonts/all.h>
@@ -26,23 +26,10 @@
 #include "activities/util/FullScreenMessageActivity.h"
 #include "fontIds.h"
 
-#define SPI_FQ 40000000
-// Display SPI pins (custom pins for XteinkX4, not hardware SPI defaults)
-#define EPD_SCLK 8   // SPI Clock
-#define EPD_MOSI 10  // SPI MOSI (Master Out Slave In)
-#define EPD_CS 21    // Chip Select
-#define EPD_DC 4     // Data/Command
-#define EPD_RST 5    // Reset
-#define EPD_BUSY 6   // Busy
-
-#define UART0_RXD 20  // Used for USB connection detection
-
-#define SD_SPI_MISO 7
-
-EInkDisplay einkDisplay(EPD_SCLK, EPD_MOSI, EPD_CS, EPD_DC, EPD_RST, EPD_BUSY);
-InputManager inputManager;
-MappedInputManager mappedInputManager(inputManager);
-GfxRenderer renderer(einkDisplay);
+HalDisplay display;
+HalGPIO gpio;
+MappedInputManager mappedInputManager(gpio);
+GfxRenderer renderer(display);
 Activity* currentActivity;
 
 // Fonts
@@ -170,21 +157,20 @@ void verifyPowerButtonDuration() {
   const uint16_t calibratedPressDuration =
       (calibration < SETTINGS.getPowerButtonDuration()) ? SETTINGS.getPowerButtonDuration() - calibration : 1;
 
-  inputManager.update();
-  // Verify the user has actually pressed
+  gpio.update();
   // Needed because inputManager.isPressed() may take up to ~500ms to return the correct state
-  while (!inputManager.isPressed(InputManager::BTN_POWER) && millis() - start < 1000) {
+  while (!gpio.isPressed(HalGPIO::BTN_POWER) && millis() - start < 1000) {
     delay(10);  // only wait 10ms each iteration to not delay too much in case of short configured duration.
-    inputManager.update();
+    gpio.update();
   }
 
   t2 = millis();
-  if (inputManager.isPressed(InputManager::BTN_POWER)) {
+  if (gpio.isPressed(HalGPIO::BTN_POWER)) {
     do {
       delay(10);
-      inputManager.update();
-    } while (inputManager.isPressed(InputManager::BTN_POWER) && inputManager.getHeldTime() < calibratedPressDuration);
-    abort = inputManager.getHeldTime() < calibratedPressDuration;
+      gpio.update();
+    } while (gpio.isPressed(HalGPIO::BTN_POWER) && gpio.getHeldTime() < calibratedPressDuration);
+    abort = gpio.getHeldTime() < calibratedPressDuration;
   } else {
     abort = true;
   }
@@ -192,16 +178,15 @@ void verifyPowerButtonDuration() {
   if (abort) {
     // Button released too early. Returning to sleep.
     // IMPORTANT: Re-arm the wakeup trigger before sleeping again
-    esp_deep_sleep_enable_gpio_wakeup(1ULL << InputManager::POWER_BUTTON_PIN, ESP_GPIO_WAKEUP_GPIO_LOW);
-    esp_deep_sleep_start();
+    gpio.startDeepSleep();
   }
 }
 
 void waitForPowerRelease() {
-  inputManager.update();
-  while (inputManager.isPressed(InputManager::BTN_POWER)) {
+  gpio.update();
+  while (gpio.isPressed(HalGPIO::BTN_POWER)) {
     delay(50);
-    inputManager.update();
+    gpio.update();
   }
 }
 
@@ -210,14 +195,11 @@ void enterDeepSleep() {
   exitActivity();
   enterNewActivity(new SleepActivity(renderer, mappedInputManager));
 
-  einkDisplay.deepSleep();
+  display.deepSleep();
   Serial.printf("[%lu] [   ] Power button press calibration value: %lu ms\n", millis(), t2 - t1);
   Serial.printf("[%lu] [   ] Entering deep sleep.\n", millis());
-  esp_deep_sleep_enable_gpio_wakeup(1ULL << InputManager::POWER_BUTTON_PIN, ESP_GPIO_WAKEUP_GPIO_LOW);
-  // Ensure that the power button has been released to avoid immediately turning back on if you're holding it
-  waitForPowerRelease();
-  // Enter Deep Sleep
-  esp_deep_sleep_start();
+
+  gpio.startDeepSleep();
 }
 
 void onGoHome();
@@ -261,7 +243,7 @@ void onGoHome() {
 }
 
 void setupDisplayAndFonts() {
-  einkDisplay.begin();
+  display.begin();
   Serial.printf("[%lu] [   ] Display initialized\n", millis());
   renderer.insertFont(BOOKERLY_14_FONT_ID, bookerly14FontFamily);
 #ifndef OMIT_FONTS
@@ -284,27 +266,13 @@ void setupDisplayAndFonts() {
   Serial.printf("[%lu] [   ] Fonts setup\n", millis());
 }
 
-bool isUsbConnected() {
-  // U0RXD/GPIO20 reads HIGH when USB is connected
-  return digitalRead(UART0_RXD) == HIGH;
-}
-
-bool isWakeupByPowerButton() {
-  const auto wakeupCause = esp_sleep_get_wakeup_cause();
-  const auto resetReason = esp_reset_reason();
-  if (isUsbConnected()) {
-    return wakeupCause == ESP_SLEEP_WAKEUP_GPIO;
-  } else {
-    return (wakeupCause == ESP_SLEEP_WAKEUP_UNDEFINED) && (resetReason == ESP_RST_POWERON);
-  }
-}
-
 void setup() {
   t1 = millis();
 
+  gpio.begin();
+
   // Only start serial if USB connected
-  pinMode(UART0_RXD, INPUT);
-  if (isUsbConnected()) {
+  if (gpio.isUsbConnected()) {
     Serial.begin(115200);
     // Wait up to 3 seconds for Serial to be ready to catch early logs
     unsigned long start = millis();
@@ -313,13 +281,6 @@ void setup() {
     }
   }
 
-  inputManager.begin();
-  // Initialize pins
-  pinMode(BAT_GPIO0, INPUT);
-
-  // Initialize SPI with custom pins
-  SPI.begin(EPD_SCLK, SD_SPI_MISO, EPD_MOSI, EPD_CS);
-
   // SD Card Initialization
   // We need 6 open files concurrently when parsing a new chapter
   if (!SdMan.begin()) {
@@ -333,7 +294,7 @@ void setup() {
   SETTINGS.loadFromFile();
   KOREADER_STORE.loadFromFile();
 
-  if (isWakeupByPowerButton()) {
+  if (gpio.isWakeupByPowerButton()) {
     // For normal wakeups, verify power button press duration
     Serial.printf("[%lu] [   ] Verifying power button press duration\n", millis());
     verifyPowerButtonDuration();
@@ -370,7 +331,7 @@ void loop() {
   const unsigned long loopStartTime = millis();
   static unsigned long lastMemPrint = 0;
 
-  inputManager.update();
+  gpio.update();
 
   if (Serial && millis() - lastMemPrint >= 10000) {
     Serial.printf("[%lu] [MEM] Free: %d bytes, Total: %d bytes, Min Free: %d bytes\n", millis(), ESP.getFreeHeap(),
@@ -380,8 +341,7 @@ void loop() {
 
   // Check for any user activity (button press or release) or active background work
   static unsigned long lastActivityTime = millis();
-  if (inputManager.wasAnyPressed() || inputManager.wasAnyReleased() ||
-      (currentActivity && currentActivity->preventAutoSleep())) {
+  if (gpio.wasAnyPressed() || gpio.wasAnyReleased() || (currentActivity && currentActivity->preventAutoSleep())) {
     lastActivityTime = millis();  // Reset inactivity timer
   }
 
@@ -393,8 +353,7 @@ void loop() {
     return;
   }
 
-  if (inputManager.isPressed(InputManager::BTN_POWER) &&
-      inputManager.getHeldTime() > SETTINGS.getPowerButtonDuration()) {
+  if (gpio.isPressed(HalGPIO::BTN_POWER) && gpio.getHeldTime() > SETTINGS.getPowerButtonDuration()) {
     enterDeepSleep();
     // This should never be hit as `enterDeepSleep` calls esp_deep_sleep_start
     return;